*mydirectindustry

IMA2DMS
1 /3Pages

Catalog excerpts

Amplifier for load cells with strain gauge full bridge Series IMA2-DMS Amplification module for force sensors including strain gauge full bridges with 5V or 10V bridge supply. ■ For all strain gauge sensors ■ Temp. coefficient <0,02% F.S./°C ■ Misc. output signals ■ Galvanically isolated Electrical Data Supply voltage Power consumption (no load) Supply voltage sensor Sensitivity Setting range offset Setting range amplification Output signal Noise, residual ripple Linearity deviation Temperature coefficient sensitivity Temperature coefficient zero point Limit frequency / Output (3db) Insulation resistance 1.) Insulation voltage!) Overvoltage max. 24 VDC (18..36 VDC), optional 12 VDC (9..18 VDC) max. 150 mA @ 24 VDC, max. 300 mA @ 12 VDC 10 VDC, optional 5 VDC 1,0 mV/V / 1,2 mV/V / 1,5 mV/V / 2,0 mV/V / 3,0 mV/V ±10% < ±10% < ±10% 0..5 V / 0..10 V / ±5 V / ±10 V / 0..20 mA / 4..20 mA < 20 mVeff (DC..20 MHz) < ±0,01% < ±0,02% /° C < ±0,01% /° C 1 kHz 1 GOhm @ 500 VDC 500 VAC, 1 min 40 V Mechanical Data, Environmental Conditions, Miscellaneous Housing Mounting Operating temperature range Storage temperature range Mass UEGM (PhoenixConact) DIN Rail -25..+85°C -30..+85°C ca. 100 g 1.) According IEC 60393 2.) Determined by climatic conditions according to IEC 68-1, para. 5.3.1 without load collectives Please note: Max. permissible supply voltage <75 VDC respectively <50 VAC in addition the max. power rating must be observed MEGATRON Elektronik GmbH & Co. KG ■ Hermann-Oberth-Strasse 7 ■ 85640 Putzbrunn / Munich Tel.: +49 89 46094-0 ■ Fax: +49 89 46094-201 ■ www.megatron.de ■ [email protected] Specifications are subject to change without notice

Open the catalog to page 1

Amplifier for load cells with strain gauge full bridge Series IMA2-DMS Order code Description Series: Supply voltage: 24 V (18..36 VDC) Option 12 V (9..18 VDC) Output signal: 0..5 V 0..10 V ±5 V ±10 V 0..20 mA 4..20 mA Excitation voltage 10 V Option 5 V Sensitivity: 1,0 mV/V 1,2 mV/V 1,5 mV/V 2,0 mV/V 3,0 mV/V Selection: standard=black/bold, possible options=grey/cursive For higher quantities or on-going demand, additional options are available on request MEGATRON Elektronik GmbH & Co. KG ■ Hermann-Oberth-Strasse 7 ■ 85640 Putzbrunn / Munich Tel.: +49 89 46094-0 ■ Fax: +49 89 46094-201 ■ www.megatron.de...

Open the catalog to page 2

Data Sheet for Amplifier Series IMA2-DMS Amplifier for load cells with strain gauge full bridge Drawing Connection Gain Offset (11) Ground (Output signal) (10) Sense + (9) Exitation sensor + (8) Sensor input + (7) Shield (6) Sensor input (5) Exitation sensor - MEGATRON Elektronik GmbH & Co. KG ▪ Hermann-Oberth-Strasse 7 ▪ 85640 Putzbrunn / Munich Tel.: +49 89 46094-0 ▪ Fax: +49 89 46094-201 ▪ www.megatron.de ▪ [email protected] Specifications are subject to change without notice Date: Page:

Open the catalog to page 3

IMA2DMS1 /3Pages

IMA2DMS1 /3Pages

Catalog excerpts

All MEGATRON Elektronik GmbH & Co. KG catalogs and technical brochures

IMA2DMS
1 /3Pages

IMA2DMS
1 /3Pages