HSM22S Brochure en
6Pages

Catalog excerpts

Hall-Effect Single-Turn Rotary Encoder Series HSM22S Wide operating temperature range -40..105°C Also available with redundant electronics Only 13.1 mm housing depth Compact 022.5 mm housing 06 mm shaft 5 V, 12 V or 24 V supply voltage IP65 Sleeve bearing The HSM22S encoder is suitable for replacing potentiometers due to its widely used housing diameter of 022.5 mm and compact overall dimensions. The HSM22S is also available with redundant electronics for increased reliability requirements. The wide operating temperature range and high IP protection class also make the encoder suitable for applications with increased environmental requirements. Effective electrical angle of rotation 1.) Independent linearity (bet straight line) 1.) Output signal Resolution 1.) Update rate Supply voltage Power consumption (no load) Output load Insulation voltage Insulation resistance 1.) 360° ±0.5 % @VSUP 5 V Output voltage: 10 % ±3 %..90 % ±3 % from VSUP (ratiometric) @VSUP 24 V or 12 V Output voltage 10 % ±3 %..90 % ±3 % from 24 V or 12 V 12 Bit (4096 steps) 800 |js 5 VDC ±0,5 V 12 VDC ±0,5 V 24VDC ±0,5 V < 16 mA (single) < 32 mA (redundant) > 10 kQ ±8 kV contact discharge, ±16 kV aerial discharge (IEC 61000-4-2) >1000 MQ @ 500 VDC Mechanical angle of rotation 1.) Lifetime 2.) Bearing Max. operational speed Operational torque @ RT 1.) 2.) Operating temperature range Storage temperature range Protection grade (IEC 60529) Vibration (IEC 68-2-6, Test Fc) Shock (IEC 68-2-27, Test Ea) Housing diameter Housing depth Shaft diameter Shaft type 360° without stop 50 mio. shaft revolutions Sleeve bearing 400 rev./min < 5 Nmm -40..+105 °C -40..+105 °C IP65 10..2000 Hz 196 m/s2 12 hours 980 m/s2 6 ms (18 times) 22.5 mm 13.9 mm 6 mm Solid shaft MEGATRON Elektronik GmbH & Co. KG ■ Hermann-Oberth-Strasse 7 ■ 85640 Putzbrunn / Munich Date: 02/08/2023 Tel.: +49 89 46094-0 ■ www.megatron.de ■ info@megatron.de Page: 1 of 6 Specifications are subject to change without notice

Open the catalog to page 1

Max. allowed radial load Max. allowed axial load Connection type Connection position Sensor mounting Mass Fastening parts included in delivery Fastening torque mounting nut Material shaft Material housing <1 N <1 N Single strands 180 mm ±20 mm Axial Bushing app. 20 g Hex nut, tooth washer < 100 Ncm Stainless steel Plastic 1.) According IEC 60393 2.) Determined by climatic conditions according to IEC 68-1, para. 5.3.1 without load collectives MEGATRON Elektronik GmbH & Co. KG ■ Hermann-Oberth-Strasse 7 ■ 85640 Putzbrunn / Munich Tel.: +49 89 46094-0 ■ www.megatron.de ■ info@megatron.de...

Open the catalog to page 2

Hall-Effect Single-Turn Rotary Encoder Series HSM22S Order code (non redundant version) Description Series: Shaft diameter / shaft length: 0 6.00 mm x 23.1 mm Option: user defined shaft [mm] (Shaft diameters > 6.00 mm are designed as two part shaft) Supply voltage / output signal: VSUP=5 V ±10 % / output voltage 10 % ±3%..90 % ±3 % from VSUP (ratiometric) 0505 Option: VSUP 12 V±0.5 V/Output voltage: 1,2 V±0.36 V to 10,8 V±0.36 V 1212 Option: VSUP 24 V ±0.5 V / Output voltage: 2.4 V ±0.72 V to 21.6 V ±0.72 V 2424 Sense of rotation output signal: Signal increases by turning the shaft...

Open the catalog to page 3

Data Sheet for Angle SensorsHall-Effect Single-Turn Rotary EncoderOrder example (redundant version) Description Series: Redundant electronic: Galvanically insulated electronic (2 separate supply voltages, 2 separate grounds, =6 electrical connection cables [VSUP1, VSUP2, Ground 1, Ground 2, Out 1, Out 2 ) Galvanically not insulated electronics (one supply voltage, one ground, =4 electrical connection cables [IxVSUP, IxGround, Out 1, Out2]) Shaft diameter / shaft length: 0 6.00 mm x 23.1 mm 6x23,1 Option: user defined shaft [mm] XxXX (Shaft diameters > 6.00 mm are designed as two piece...

Open the catalog to page 4

Data Sheet for Angle Sensors Note: 1. 1 pc. each of inner teeth washer and hex nut is attached. 2. Please duly note that inner construction may burn out when applying the voltage to the wrong terminals except input terminal. Hall-Effect Single-Turn Rotary Encoder ● Environmental Specif ications Thermal Shock Exposure at High Temperature 3 Lead wires (PVC 0.18 mm²) / (4 wires in case of dual output) / (6 wires in case of dual independent output) ±8kV contact discharge /±15kV aerial discharge (Based on IEC 61000-4-2) ± 0. 2 Rotational Life Expectancy 10 Note:Rotational Life Expectancy8 may...

Open the catalog to page 5

Terminal Connection Diagram Dual Independent output Single output Data Sheet for Angle Sensors Hall-Effect Single-Turn Rotary output Dual Encoder Output Characteristics OUT A OUT B (In case of a parallel output) 180 Rotating Angle (°) CW Rotating Angle（°） OUT B (In case of a crossing output) MEGATRON Elektronik GmbH & Co. KG ▪ Hermann-Oberth-Strasse 7 ▪ 85640 Putzbrunn / Munich Tel.: +49 89 46094-0 ▪ www.megatron.de ▪ info@megatron.de Specifications are subject to change without notice Date: Page:

Open the catalog to page 6

HSM22S Brochure en 6Pages

Catalog excerpts

All MEGATRON Elektronik GmbH & Co. KG catalogs and technical brochures

HSM22S Brochure en
6Pages