HSM22M
7Pages

Catalog excerpts

Hall-Effect Multi-Turn Rotary Encoder Series HSM22M ■ 10 turn (=3600°) Hall rotary encoder ■ True-Power-On ■ Compact 022.5 mm housing ■ 06 mm Shaft ■ Sleeve bearing ■ 5 V, 12 V or 24 V supply voltage ■ Voltage or current output ■ As option with redundant output electronic ■ High reliability in measurement value capturing and processing The rotary encoders from the HSM22M series are real "True-Power-On" multiturn encoders, in which the output signal always corresponds to the angle of rotation, even if the angle of rotation changes during loss of supply voltage. In the comparison to other multiturn rotary encoder technologies and signal evaluation processing methods the MEGATRON HSM22M ensures the highest level of reliability and failure safety. Effective electrical angle of rotation 1.) Independent linearity (best straight line) 1.) Output signal Resolution 1.) Standard 3600°±7°, As option programmable ex works 360° < a < 3600° ±7' ±0.5 % @3600° Voltage output: @VSUP5V Output voltage: 5 % ±3 %..95 % ±3 % ratiometric @ VSUP 24 V or 12 V Output voltage: 5 % ±3 %..95 % ±3 % 12 Bit (4096 steps) Update rate Backlash (Hysteresis) 1.) Supply voltage Power consumption (no load) Output load Insulation voltage Insulation resistance 1.) With voltage output: 5 VDC ±0.5 V 12 VDC ±0.5 V 24VDC ±0.5 V Voltage output: < 16 mA (single) < 32 mA (redundant) Voltage output: With current output: 24 VDC ±0.5 V Current output: < 22 mA Current output: ±8 kV contact discharge, ±16 kV arial discharge (IEC 61000-4-2) >1000 MQ @ 500 VDC Mechanical and Environmental Data 360° without stop > 20 mio. shaft revolutions Sleeve bearing 400 rev./min < 5 Nmm -40..+85 °C -40..+85 °C IP50 Mechanical angle of rotation 1.) Lifetime 2.) Bearing Max. operational speed Operational torque @ RT 1.) 2.) Operating temperature range Storage temperature range Protection grade front side (IEC 60529) MEGATRON Elektronik GmbH & Co. KG ■ Hermann-Oberth-Strasse 7 ■ 85640 Putzbrunn / Munich Date: 08/27/2019 Tel.: +49 89 46094-0 ■ Fax: +49 89 46094-201 ■ www.megatron.de ■ info@megatron.de Page: 1 of 7

Open the catalog to page 1

Data Sheet for Angle SensorsHall-Effect Multi-Turn Rotary Encoder Series HSM22MMechanical and Environmental Data, Miscellaneous Vibration (IEC 68-2-6, Test Fc) 1.) According IEC 60393 2.) Determined by climatic conditions according to IEC 68-1, para. 5.3.1 without load collectives MEGATRON Elektronik GmbH & Co. KG ■ Hermann-Oberth-Strasse 7 ■ 85640 Putzbrunn / Munich Date: 08/27/2019 Tel.: +49 89 46094-0 ■ Fax: +49 89 46094-201 ■ www.megatron.de ■ info@megatron.de Page: 2 of 7 Specifications are subject to change without notice

Open the catalog to page 2

Hall-Effect Multi-Turn Rotary Encoder Series HSM22M Order Code for single output version (non redundant version) Description Selection: Standard=black/bold, possible options=grey/cursive Electrical connection: Single strands length 0,18 m for voltage output (Single strands only available in combination with voltage output 0505, 1212, 2424. Not available for 2442 electronics with current output) Solder terminals for current output (Solder terminals exclusively available in combination with 2442 electronics with current output. Solder terminals not available for voltage output 0505, 1212,...

Open the catalog to page 3

Data Sheet for Angle SensorsHall-Effect Multi-Turn Rotary EncoderOrder Code for redundant Version Description Series: Multiturn: Redundant electronic: Galvanically insulated electronic voltages, 2 separate grounds, =6 electrical connection cables [VSUP1, VSUP2, Ground 1, Ground 2, Out 1, Out 2 ) Galvanically not insulated electronics one ground, =4 electrical connection cables [1xVSUP, IxGround, Out 1, Out2]) Shaft diameter / shaft length: 0 6.00 mm x 23.1 mm Option: user defined shaft [mm] (Shaft diameters > 6,00 mm are designed as two piece shaft) Supply voltage / output signal: VSUP=5 V...

Open the catalog to page 4

Data Sheet for Angle Sensors Series HSM22M Hall-Effect Multi-Turn Rotary Encoder Technical Drawing HSM22M version with voltage output 0505 or 1212 or 2424 electronic with single strands as electrical connection 3 Lead wires (PVC 0.18 mm²) / (4 wires in case of dual output) / (6 wires in case of dual independent output) ・Output type・・・・・・・・・・・・・・・・・・・・・・・・・ Single output ・Mechanical rotating angle・・・・・・・・・・・・・・ 360° (Endless) ・Starting torque・・・・・・・・・・・・・・・・・・・・・・・ Below 5 mN･m （50 gf･cm） 10 ・Current consumption・・・・・・・・・・・・・・・・・・ Below 22 mA ・Independent linearity tolerance・・・・・・・・・・ Within...

Open the catalog to page 5

Note:Rotational Life Expectancy may differ from the specifications depending on status of use. Data Sheet for Angle Sensors Series HSM22M B part only) Hall-Effect Multi-Turn Rotary Encoder Connection Diagrams for Single Strands ● Terminal Connection Diagram Single electronic: 1 electrical output Single output Redundant electronics X2: 2 electrical outputs galvanicallyDual output not insulated Redundant electronics X1: 2 electrical outputs Dual Independent galvanically insulated output (In case of the potentiometer with special specifications, the general specifications and environmental...

Open the catalog to page 6

Rotating Torque Note:Rotational Life Expec depending on status o Backlash Within 10° Data Sheet for Angle Sensors Dielectric Strength Insulation Resistance OUT A Redundant outputs X1 or X2 with sense of rotation: CW, CW OUT B (In case of a parallel output) Note : 1 pc. each of inner teeth washer Dual Indepen attached. From supply voltage: 5%±3% 5% ±3% Electrical rotating angle 3600° ±7° →CW OUT B Redundant outputs X1 or IN(In case of a cross output)X2 with sense of rotation: CW, CCW ● Special Specifications Available 23.1 ±1 (In case of the potentiometer with sp and environmental...

Open the catalog to page 7

HSM22M 7Pages

Catalog excerpts

All MEGATRON Elektronik GmbH & Co. KG catalogs and technical brochures

HSM22M
7Pages