Multiturn Hybrid Potentiometer Series HH17/19 HH(R)17/19 soldering lugs The HH(R)17/19 potentiometers in 22 mm housing are suitable for applications where a long life and very high-resolution multiturn potentiometer is important. ■ Very high-resolution and long-lasting due to hybrid technology ■ Very clean signal - no winding jumps thanks to hybrid technology ■ Simplified installation due to connector version ■ Version HHR17/19 with integrated slipping clutch The high-resolution precision potentiometers of the HH(R)17/19 series have a wire-wound resistor element, which is finished with a conductive plastic layer. Thus the so-called winding jumps are omitted and the resolution is almost infinite. Due to the smooth surface of the resistance element, the hybrid potentiometer has a significantly longer life and qualifies it as a position feedback in closed loop control circuits. The shaft diameters is 06,35 / 06.00 mm (HH(R)17/HH(R)19) and is equipped with a screwdriver slot. In addition, an optional integrated slipping clutch protects the potentiometer from damage by overrunning the end stops and facilitates the zero point adjustment. The potentiometer is available in a 3, 5 or 10 turn version. The radial gold-plated connection pins are suitable for flat connectors (2.8 mm according to DIN 46247 part 3) and the connector version simplifies the mounting. Effective electrical angle of rotation 1.) Total resistance 1.) Resistance tolerance Independent linearity (best straight line) 1.) Theoretical resolution 1.) Backlash (Hysteresis) 1.) Max. / recommended wiper current 1.) Power rating @ 70°C (0W @ 105°C) Insulation Voltage 1.) Insulation Resistance 1.) Mechanical Data, Environmental Conditions, Miscellaneous 3-turn Mechanical angle of rotation Lifetime (90% el. eff. angle half sine) 2.) Max. operational speed Bearing Operational torque @ ambient temperature 1.) 2.) End stop torque 1.) 2.) Operating temperature range Storage temperature range Protection grade (IEC 60529) Protection option D shaft sealing (IEC 60529) Vibration (IEC 68-2-6, Test Fc) Shock (IEC 68-2-27, Test Ea) Housing diameter Housing depth Shaft diameter (HH17/19) Shaft type 1800° +10° 2,5 Mio. rotations 40 rev. / min. Brass bearing 5 Nmm 35 Ncm -20.. + 105°C -55.. + 105°C MEGATRON Elektronik GmbH & Co. KG ■ Hermann-Oberth-Strasse 7 ■ 85640 Putzbrunn / Munich Date: 07/06/2020 Tel.: +49 89 46094-0 ■ Fax: +49 89 46094-201 ■ www.megatron.de ■ [email protected] Page: 1 of 5

Multiturn Hybrid Potentiometer Series HH17/19 Mechanical Data, Environmental Condi-3-turn tions, Miscellaneous 1.) According IEC 60393 2.) Determined by climatic conditions according to IEC 68-1, para. 5.3.1 without load collectives Please note: Max. permissible supply voltage <75 VDC respectively <50 VAC in addition the max. power rating must be observed MEGATRON Elektronik GmbH & Co. KG ■ Hermann-Oberth-Strasse 7 ■ 85640 Putzbrunn / Munich Tel.: +49 89 46094-0 ■ Fax: +49 89 46094-201 ■ www.megatron.de ■ [email protected] Specifications are subject to change without notice

Data Sheet for Precision PotentiometerMultiturn Hybrid PotentiometerOrder code Description Series: Slipping clutch: Without additional mechanics With integrated slipping clutch Shaft diameter: 0 6,35 mm 0 6,00 mm Revolutions with stop: Option 3-turn Option 5-turn 10-turn Resistance value / Option Tandem: Option 1 kOhm (only 3 and 5-turn) Option 2 kOhm 5 kOhm 10 kOhm Option 20 kOhm Option 50 kOhm Option 100 kOhm (only 10 Turn) Option rear shaft: HH(R)17 = 06,35 x 15 mm HH(R 19) = 06,00 x 15 mm Shaft length in mm Shaft diameter in mm (<6,35 mm) Resistance tolerance: ±10% Option ±5% Independent...

Data Sheet for Precision Potentiometer Series HH17/19 Multiturn Hybrid Potentiometer Drawing Mounting surface 3/8"-32 UNEF Option rear shaft extension Option multiganged 7,9 Connector Version MEGATRON Elektronik GmbH & Co. KG ▪ Hermann-Oberth-Strasse 7 ▪ 85640 Putzbrunn / Munich Tel.: +49 89 46094-0 ▪ Fax: +49 89 46094-201 ▪ www.megatron.de ▪ [email protected] Specifications are subject to change without notice

Data Sheet for Precision PotentiometerMultiturn Hybrid PotentiometerOn Request: Special machining on shaft Slot Double side flat Counterbore hole Counterbore screw hole Screw Thread Screw thread inside hole MEGATRON Elektronik GmbH & Co. KG ■ Hermann-Oberth-Strasse 7 ■ 85640 Putzbrunn / Munich Date: 07/06/2020 Tel.: +49 89 46094-0 ■ Fax: +49 89 46094-201 ■ www.megatron.de ■ [email protected] Page: 5 of 5 Specifications are subject to change without notice