Data Sheet for Joysticks Series TRY81 Hand Joysticks Up to 3 axes (rotatable handle) Long service life due to non-contact sensor technology Headstock individually configurable Vielfältige Ausgangsoptionen verfügbar (analog, CAN J1939, CANopen, USB) The TRY81 series is an extremely robust, industrial-grade design for use in harsh environments. With optional safety functions, the use in safety-critical applications is also guaranteed. In addition to the standard available analog output signals, this series is also available with USB or CAN bus interfaces. Electrical Data Joystick Sensor Hall Effect Supply Voltage Power Rating Output Impedance Independent Linearity Tolerance Return to Center Voltage (no Load) Output Voltages 0 - 5 V / 0.5 - 4.5 V / 0.25 - 4.75 V / dual signals available Mechanical Data Joystick Expected Life Mechanical Angle of Movement X & Y / Z Axis Break Out Force X & Y / Z Axis Operating Force X & Y / Z Axis Maximum Applied Force X & Y / Z Axis Environmental Sealing (above panel) up to IP63 (depending on handle configuration) Operating Temperature Storage Temperature Notes: 1. All values are nominal 2. Exact specifications may be subject to configuration MEGATRON Elektronik GmbH & Co. KG ▪ Hermann-Oberth-Strasse 7 ▪ 85640 Putzbrunn / Munich Tel.: +49 89 46094-0 ▪ www.megatron.de ▪ [email protected] Specifications are subject to change without notice

Data Sheet for Joysticks Series TRY81 Hand Joysticks Configuration Examples Oval Faceplate Configuration Examples Square Faceplate Technical Data Pushbuttons Max. Electrical Resistive Load Electrical Life Mechanical Life Environmental Sealing Momentary, snap-action Operating Force Total Travel Available Button Colours white, grey, black, red, orange, yellow, green, blue, purple Note: 1. Max. configuration of the handle takes up to 8 pushbuttons and 4 LEDs in the faceplate, plus an Index trigger or Proximity sensor. 2. If unspecified, the pushbuttons will have snap-action momentary switches with...

Data Sheet for Joysticks Series TRY81 Hand Joysticks Order Code Description Series Selection: standard=black/bold, possible options=grey/italics TRY81 Axes: 1 Axis 2 Axes 3 Axes Sealing: Rubber Boot Return Mechanism: Spring Return Limiters: Square Round X/Y „Plus“ 1 Axis X 1 Axis Y Handles: Handle with rectangular faceplate Handle with 2 Pushbuttons, rect. faceplate Handle with 4 Pushbuttons, rect. faceplate Handle with 8 Pushbuttons, rect. faceplate Handle with oval faceplate, customer-spec. Index Trigger: None With Trigger Output Options: 0 - 5 V single (inverse dual output) 0.5 - 4.5 V (inverse...

Data Sheet for Joysticks Hand Joysticks MEGATRON Elektronik GmbH & Co. KG ▪ Hermann-Oberth-Strasse 7 ▪ 85640 Putzbrunn / Munich Tel.: +49 89 46094-0 ▪ www.megatron.de ▪ [email protected] Specifications are subject to change without notice Date: Page:

Data Sheet for Joysticks Series TRY81 Hand Joysticks Mounting Drop-In Installation Wiring (analogue output) Colour Pushb. Common Supply Power Notes: 1. Standard cable length ca. 400 mm; Cable AWG 22 for Joystick functions, Switches, LEDs, etc. 2. Joysticks with USB interface or mouse emulation are supplied with wiring with USB male type A connector; optionally ruggedized military connectors are available 3. Wire colour code might deviate from this table for special output options (CANbus J1939, CanOpen, Center Detect; etc.), detailed information will be given with your specific product Limiters...