Data Sheet for Joysticks Series TRY54 Hand Joystick Heavy-Duty Joystick with CAN J1939-71 or CANopen interface Low installation depth < 60 mm SIL 2 compatible - redundant hall sensors 10 million cycles resisting high axial load (up to 1780 N) Multifunction handle providing space for additional functional elements (pushbutton switches, rockers, thumb joysticks, thumbwheels, etc.) The TRY54 range of joysticks has been designed with the most demanding heavy duty and off-road applications in mind. The use of metal components and optimized dimensions of the mechanism and control lever result in a customizable joystick with the reliability of larger models and significantly reduced dimensions. Electrical Data Joystick Sensor Redundant Hall Sensors Supply Voltage Output signal Mechanical and Environmental Data Joystick Deflection angle Maximum axial load Expected life 10 million lifecycles (X and Y axis) Sealing (above panel) Up to IP67 (subject to handle configuration) Operating Temperature Storage Temperature Thermal Shock Salt spray Random vibration Sinusoidal vibration Radiated Emissions Level: ECE/324/Add.9:2012; CISPR 25:2002 Radiated Emissions Level: CISPR 25:2008 ESD: ISC 10605:2008; criteria A Radiated Immunity: ISO 11452-2:2004; criteria B Bulk current injected immunity: ISO 11452-4:2011; criteria A Pulse 1, Pulse 2a, Pulse 2b, Pulse 3a, Pulse 3b, Pulse 4, Pulse 5a: ISO 76372:2011; criteria A Notes: 1. All values are nominal 2. Exact specifications may be subject to configuration MEGATRON Elektronik GmbH & Co. KG ▪ Hermann-Oberth-Strasse 7 ▪ 85640 Putzbrunn / Munich Tel.: +49 89 46094-0 ▪ www.megatron.de ▪ [email protected] Specifications are subject to change without notice Date: Page

Data Sheet for Joysticks Series TRY54 Hand Joystick Pushbuttons Characteristics Max. Current / Voltage Rating with Resistive Load Electrical Life at Full Load Mechanical Life Environmental Seal Momentary, normally-open Operating Force Total Travel Pushbutton Colors available White, Grey, Black, Red, Orange, Yellow, Green, Blue Faceplate configuration options (other individual realizations possible) Notes: 1. If unspecified, the pushbutton caps will be colored red 2. Many other combinations of functional elements can be integrated into the faceplate, in addition to individual selection of pushbutton...

Data Sheet for Joysticks Series TRY54 Hand Joystick Please contact us for information regarding stock articles, delivery times and minimum order quantities. Order Code Description Series Axes 1 axis 2 axes Rubber Boot Return Mechanism (1) Standard spring (0.8 Nm) (1) Improved spring (1.24 Nm) (1) Limiter Square Square with “guided feel“ (2) 1 axis, x direction 1 axis, y direction Output Signal SAE CANbus J1939-71 CANopen Faceplate configuration None 1 Pushbutton 2 Pushbuttons 3 Pushbuttons 4 Pushbuttons 5 Pushbuttons 6 Pushbuttons 8 Pushbuttons 1 Toggle Switch left, 2 Pushbuttons right 2 Toggle...

Data Sheet for Joysticks Hand Joystick Trigger Deadman Paddle Strain relief Dimensions in mm (inches) Panel Cut-Out MEGATRON Elektronik GmbH & Co. KG ▪ Hermann-Oberth-Strasse 7 ▪ 85640 Putzbrunn / Munich Tel.: +49 89 46094-0 ▪ www.megatron.de ▪ [email protected] Specifications are subject to change without notice Date: Page:

Data Sheet for Joysticks Series TRY54 Hand Joystick Limiters Square Square “guided feel“ (1) “guided feel“ still allows the joystick handle to be deflected omni-directionally, but as the operation force needed for the main axes is slightly below the force needed for diagonal deflection the resulting impression is that of a „guided movement“. (1) WIRE COLOUR Standard cable length ca. 150 ±1.3 mm; wire AWG 22, PTFE Insulation. Individual cable configuration available upon request. CAN J1939 Interface Parameters* All axis and button data are delivered on a CAN 2.0B compliant physical interface....

Data Sheet for Joysticks Series TRY54 Hand Joystick BJM1 DATA FIELD STRUCTURE START POSITION (BYTE/BIT) LENGTH (BITS) Primary X-axis neutral position status Primary X-axis left position status Primary X-axis right position status Primary X-axis position data Primary Y-axis neutral position status Primary Y-axis down position status Primary Y-axis up position status Primary Y-axis position data Button 8 status (Paddle if 6 button configuration) Button 7 status (Trigger if 6 button configuration) EJM1 DATA FIELD STRUCTURE START POSITION (BYTE/BIT) LENGTH (BITS) Redundant X-axis neutral position...