Data Sheet for Joysticks Series 847 Finger Joystick Dual redundant outputs IP67 sealed 2 lever heights: 48 mm and 60 mm 5 lever colours Detent positions and spring return available The 847 series paddle joysticks offer high precision and quality - a claim supported not only by the soft-touch moulded grips, but also by the technical features. Contactless Hall technology combined with a smooth and easy-to-use mechanism results in a durable and reliable joystick, suitable for mild to extreme environments in mobile remote controls, cleaning machines, material handling and agricultural vehicles. Two different body geometries allow you to choose the one that best suits your application needs. Technical Data Sensor Hall effect Supply Voltage (Vsupply) Output Voltages 0 to 5 V / 0.5 to 4.5 V (dual output), PWM optional Center Voltage Current Consumption Switch Output Open drain, internal Pull-Up 1.5 kΩ to Vsupply, smoothed to 0 V with 100 nF Mechanical Operating Angle Life Cycles Operating Temperature Storage Temperature Seal above Panel IP67 above panel (with gasket) - BS EN 60529:1992+A2:2013 Damp Heat Salt Spray BS EN 60068-2-11:1999, 48 hours @ +35°C with 5% NaCl Conducted Emissions Radiated Emissions Radiated Immunity Conducted Immunity Signal Cable Transients AC Magnetic Field Immunity ISO15003 level 1 in 3 axes 10 to 350 Hz, Level 2, 8 hours/axis BS EN 60068-2-27:2009 40 g 6 ms half sine, 50 shocks in each sense of each axis, total 300 shocks Freefall drop BS EN 60068-2-31:2008, 1000 mm onto all faces and edges BS EN 60068-2-27:2009 50 g 6 ms half sine, 3 shocks in each sense of each axis, total 18 shocks MEGATRON Elektronik GmbH & Co. KG ▪ Hermann-Oberth-Strasse 7 ▪ 85640 Putzbrunn / Munich Tel.: +49 89 46094-0 ▪ www.megatron.de ▪ [email protected] Specifications are subject to change without notice

Data Sheet for Joysticks Series 847 Finger Joystick Please contact us for information regarding stock articles, delivery times and minimum order quantities. Order Code Description Series Paddle: 60 mm height above panel 48 mm height above panel Selection: standard=black/bold, possible options=grey/italics 847 1 2 Lever operation: Spring return to center Spring return to center with detent at 0° Paddle inserts: Black Red Blue Yellow Green Output options: Dual output, signals parallel (standard) Dual output, signal 2 inverted PWM signal* Output signal: Switching points: No switches Switching at...

Data Sheet for Joysticks Series 847 Finger Joystick Information on “Output Options“ and “Switching Points“ The 847 series joystick is configured as two “electrical” controls in one mechanical package. The Paddle operates from 5 V and provides two proportional outputs. The second output is accurate to the first within +/-3% of the power supply. The power supply for the secondary output is also completely independent. Customers may choose their preference of voltage outputs. The secondary output can be of the same or inverse polarity to the primary wiper. For example, with a secondary inverse output,...

Data Sheet for Joysticks Series 847 Finger Joystick Technical Drawing “Paddle 1” 60 mm height above panel Panel Cut-Out & Mounting “Paddle 1” The Joystick is fitted with M3 bushes in all six positions and may be mounted with two different hole patterns: - Two screws (shown in yellow) N - Four screws (shown in silver). Screws are not included. The appropriate length of the screws is dependent on panel thickness. MEGATRON Elektronik GmbH & Co. KG ▪ Hermann-Oberth-Strasse 7 ▪ 85640 Putzbrunn / Munich Tel.: +49 89 46094-0 ▪ www.megatron.de ▪ [email protected] Specifications are subject to change without...

Data Sheet for Joysticks Series 847 Finger Joystick Technical Drawing “Paddle 2” 48 mm height above panel 8 WAY CONNECTOR 2.54mm PITCH (0.1 INCH PITCH) Panel Cut-Out & Mounting “Paddle2” The Joystick is fitted with M3 bushes in all six positions and may be mounted with two different hole patterns: - Two screws (shown in yellow) - Four screws (shown in grey). Screws are not included. The appropriate length of the screws is dependent on panel thickness. MEGATRON Elektronik GmbH & Co. KG ▪ Hermann-Oberth-Strasse 7 ▪ 85640 Putzbrunn / Munich Tel.: +49 89 46094-0 ▪ www.megatron.de ▪ [email protected]...

Data Sheet for Joysticks Series 847 Finger Joystick Wiring PIN (+) direction: Increasing Signal Output 1 (-) direction: Decreasing Signal Output 1 Pin1 Connection via 8-pole connector, 2.54 pitch. Cable not included. Cable can be ordered separately (Part no. 135686, see below). Drawing of optional connector cable part no. 135686 – not included in joystick delivery! PIN MEGATRON Elektronik GmbH & Co. KG ▪ Hermann-Oberth-Strasse 7 ▪ 85640 Putzbrunn / Munich Tel.: +49 89 46094-0 ▪ www.megatron.de ▪ [email protected] Specifications are subject to change without notice Date: Page: