Finger Joystick Series 829 ■ Exceptional quality of mechanics and sensors ■ For demanding applications ■ 1 axis, spring return or friction clutch (with or without detent) ■ Optional with Hall sensors or potentiometers ■ Resting position of handle in center position, at negative max. deflection or at any angle using a friction clutch ■ Optional extension for current output conversion (4 to 20 mA) The 829 series joystick meets the highest quality standards. Its strengths lie in demanding single-axis applications where durability and reliability are paramount. The solid mechanical construction and the resulting high quality haptics provide a safe operating feel and enable the user to control machines precisely. The 829 series offers a wide range of configurations to suit almost any application. Angle of movement ±20° from center Operating force 1 to 2.5 N (1 to 5.5 N with rubber boot) Return to center accuracy ±1° Lifetime typ. 2 million cycles Protection grade IP65 with rubber boot (handles without button), IP40 with rubber boot for handle 6 MEGATRON Elektronik GmbH & Co. KG ■ Hermann-Oberth-Strasse 7 ■ 85640 Putzbrunn / Munich Tel.: +49 89 46094-0 ■ www.megatron.de ■ [email protected] Specifications are subject to change without notice

Finger Joystick Series 829 Please contact us for information regarding stock articles, delivery times and minimum order quantities. Order Code Description Selection: standard=black/bold, possible options=grey/italics Sealing: Rubber boot 5 Square bezel (no sealing) 8 Return mechanism: Spring return Friction clutch with centre detent Friction clutch (no detents) Spring return to negative limit (-Y position) Cylinder, with pushbutton (IP40 above panel) 6 Mounting plate: none With mounting plate Sensors: Potentiometer type K K Hall sensor type H, single output, 0.5 to 4.5 V H Hall sensor type H0505,...

Data Sheet for Joysticks Series 829 Finger Joystick Switches SCHEME of deflection-dependent switch actuation e.g. “Switches ON @ ±5° ” Deflection Angle -20° (max. travel) Technical Data Potentiometer Type K Technology Conductive plastic; bearing Nominal total resistance Resistance tolerance Independent linearity Effective electrical angle of rotation 40° Lifetime Lead wires AWG20, length ca. 300 mm Center tap (optional) (white) Technical Data Hall Sensor Type H / H0505 Technology Hall sensor Supply voltage Power consumption Output voltage (Uout) Independent linearity Load resistance Temperature...

Data Sheet for Joysticks Series 829 Finger Joystick Technical drawing - for option sealing „8“ with rectangular bezel Technical drawing - for option sealing „5“ with rubber boot Dimensions in mm Panel cut-outs and mounting plate option Option “rubber boot“ Option “square bezel“ Option “Mounting plate“ MEGATRON Elektronik GmbH & Co. KG ▪ Hermann-Oberth-Strasse 7 ▪ 85640 Putzbrunn / Munich Tel.: +49 89 46094-0 ▪ www.megatron.de ▪ [email protected] Specifications are subject to change without notice

Data Sheet for Joysticks Series 829 Finger Joystick Technical data current converter (additional option 2442) Supply voltage Current consumption Maximum consumption <100 mA, Consisting of: 1) Basic consumption voltage transformer 40 mA + 2) sum of currents per channel (4..20 mA, max. 30 mA) + 3) consumption joystick (max. 30 mA) Output signal Operating temperature Independent Linearity 1% (note: this is added to the one of the mechanics and the sensor) Insulation resistance Terminating resistor 25 to 50 Ohm (Attention: this resistance must be provided by the customer!) The current transformer...

Data Sheet for Joysticks Series 829 Finger Joystick Technical data Hall sensor option H2442 (deprecated) Load resistance 500 Ohm (must be applied, otherwise damage might occur) Insulation voltage ±8 kV (contact), ±16 kV (air) (IEC 61000-4-2) Insulation resistance > 1000 MOhm at 500 VDC MEGATRON Elektronik GmbH & Co. KG ■ Hermann-Oberth-Strasse 7 ■ 85640 Putzbrunn / Munich Tel.: +49 89 46094-0 ■ www.megatron.de ■ [email protected] Specifications are subject to change without notice