Catalogs >
MEGATRON Elektronik GmbH & Co. KG >
Finger-Tip Joystick TRY21

Finger-Tip Joystick TRY21
3Pages

Catalog excerpts

Finger Joystick Series TRY21 ■ 3-axis joystick with rotatable handle ■ Space-saving design, exceptionally low profile above panel ■ Contactless and reliable, wear-free Hall sensor technology ■ Redundant output signals optional ■ Protection IP54 The TRY21 series joysticks are unique in the market for their size, with a rotating knob that acts as a z-axis, providing an additional proportional third degree of freedom in the application. This makes the TRY21 the smallest fingertip joystick with a z-axis. The high quality haptics provide a secure feel and allow the user to precisely control movements in up to three dimensions. Technical Data Sensor Supply Voltage Independent Linearity Tolerance Return to Center Voltage Expected Life Output Voltages Currents Impedance Insulation Resistance Dielectric Strength Mechanical Angle of Movement X-, Y-Axis Mechanical Angle of Movement Z-Axis Operating Force X-Y-Axis Operating Torque Z-Axis Operating Temperature Storage Temperature Sealing (above panel) Vibration Shock EMC ESD Hall Effect 5 ± 0.5 VDC transient-free ±3 % full scale ±250 mV > 1 million cycles 0 to 5 V / 0.5 to 4.5 V / 0.25 to 4.75 V ca. 6 mA per axis >10 kOhm (>100 kOhm recommended) >100 MOhm at 250 VAC 1 minute at 250 VAC 30° (±15° from center) 60° (±30° from center) approx. 1.5 N (from center), approx. 3.5 N (full deflection), max. 50 N approx. 10 mNm (from center), approx. 30 mNm (full deflection) -20 °C to +60 °C -20 °C to +65 °C IP54 10 to 55 Hz, 98 m/s2 (10 g) 294 m/s2 (30 g) 50 V/m (80 MHz..1 GHz 1 kHz 80% AM, IEC/EN61000-4-3) IEC/EN61000-4-2, 5 kV MEGATRON Elektronik GmbH & Co. KG ■ Hermann-Oberth-StraGe 7 ■ 85640 Putzbrunn / Munchen Tel.: +49 89 46094-0 ■ Fax: +49 89 46094-201 ■ www.megatron.de ■ info@megatron.de Specifications are subject to change without

Open the catalog to page 1

Finger Joystick Series TRY21 Please contact us for information regarding stock articles, delivery times and minimum order quantities. Order Code For higher quantities or on-going demand, additional options are available For example: ■ Customer-specific cables ■ Custom handle shapes and colour MEGATRON Elektronik GmbH & Co. KG ■ Hermann-Oberth-StraGe 7 ■ 85640 Putzbrunn / Munchen Tel.: +49 89 46094-0 ■ Fax: +49 89 46094-201 ■ www.megatron.de ■ info@megatron.de Specifications are subject to change without notice

Open the catalog to page 2

Data Sheet for Joysticks Series TRY21 Finger Joystick Technical Drawings Wiring Function X-Axis Dual Output Y-Axis Dual Output Z-Axis Dual Output Termination: wires AWG28, length ca. 300 mm. They are connected to the joystick housing via MOLEX 51021-0800 connector. Included in delivery. OUT:Xa,Ya,Za（Single output） :Xb,Yb,Zb（Parallel output） Output voltage OUT:Xb,Yb,Zb （Cross output） center Mechanical rotating angle X・Y:Abt.：±15° Z:Abt.：±30° Note1：The number in （）shows connector number. Note2：In ⑴ and GND ⑻ are shown in main circuit board. MEGATRON Elektronik GmbH & Co. KG ▪...

Open the catalog to page 3

Finger-Tip Joystick TRY21 3Pages

Catalog excerpts

All MEGATRON Elektronik GmbH & Co. KG catalogs and technical brochures

Finger-Tip Joystick TRY21
3Pages