Hall-Effect Single-Turn Rotary Encoder with Analog Output Series ETAM25 ETAM25 - R ■ 10 to 100-times longer life compared with potentiometers ■ The series ETAM25 has an increased operational torque for manual control applications ■ Mechanical angle 320° (other angles on demand) ■ Sealed shaft and sealing against mounting panel ■ Analogue output (voltage and current) ■ Redundant version available (on request) The panel encoder ETAM25 is working by means of the contactless and robust Hall-Technology. Shaft and housing sealing as a standard enable the usage in harsh environment. Electrical Data Effective electrical angle of rotation 1.) Independent linearity (best straight line) 1.) Absolute Linearity 1.) Output signal Resolution 1.) Update Rate Supply voltage Power consumption (no load) Output load Insulation voltage 1.) Insulation resistance 1.) Mechanical and Environmental Data Mechanical angle of rotation 1.) 320° (270°/180°/90°), ±5° Lifetime 2.) > 100 Mio. shaft rotating movements The sealing of the shaft is at least working up to 200 000 shaft rotating movements Bearing Sleeve bearing Operational torque MT: Medium torque 0.3 < M < 1.3 Ncm (@ RT, 10 U/min) Operating temperature range -40...+85 °C (fixed cable) (the grease causes stiff torque at very low temperatures) Storage temperature range -40.. + 105 °C Protection grade front side (IEC 60529) Standard: with shaft sealing IP66S, IP55M Protection grade rear side (IEC 60529) Round cable outlet IP66 (end of cable excluded) Vibration (IEC 68-2-6, Test Fc) ±1,5 mm / 20 g / 10 bis 2000 Hz / 16 frequency cycles (3x4 h) Mechanical shock (IEC 68-27, Test Ea) 50 g / 11 ms / halfsine (3x6 shocks) MEGATRON Elektronik GmbH & Co. KG ■ Hermann-Oberth-Strasse 7 ■ 85640 Putzbrunn / Munich Date: 06/23/2017 Tel.: +49 89 46094-0 ■ Fax: +49 89 46094-201 ■ www.megatron.de ■ [email protected] Page: 1 of 7 Errors and specifications subject to cha

Data Sheet for Panel Encoders Mass (including 1 m round cable) Fastening parts included in delivery Hex nut (AF14) and tooth washer, O-Ring as sealing between mounting panel and rotary encoder. Fastening torque mounting nut Material shaft Stainless steel Material housing Plastic / Bronze EN 61000-4-6 Conducted sine wave EN 61000-4-8 Power frequency magnetic fields 1.) According IEC 60393 2.) Determined by climatic conditions according to IEC 68-1, para. 5.3.1 without load collectives Relationship between mechanical angle of rotation and effective electrical angle of rotation Mechanical angle...

Data Sheet for Panel EncodersHall-Effect Single-Turn Rotary Encoder with Analog Output Order Code MEGATRON Elektronik GmbH & Co. KG ■ Hermann-Oberth-Strasse 7 ■ 85640 Putzbrunn / Munich Date: 06/23/2017 Tel.: +49 89 46094-0 ■ Fax: +49 89 46094-201 ■ www.megatron.de ■ [email protected] Page: 3 of 7 Errors and specifications subject to change without notice

Data Sheet for Panel Encoders Hall-Effect Single-Turn Rotary Encoder with Analog Output Order example ETAM25: Requirement: Shaft Ø 6,00 mm, shaft length 22 mm, VSUP=5 V / OUT=0...5 V, with mechanical stop, sense of rotation CW, electrical angle of rotation 320°, operational torque medium torque, with shaft sealing, round cable 1.00 m, anti rotation pin B Example for order code: ETAM25 6x22 0505 SCW320 MT D R1.00B Additional options: For higher quantities or on-going demand, additional options are available as described below on request max. Customized signal characteristic For example: Redundant...

Data Sheet for Panel Encoders Series ETAM25 Hall-Effect Single-Turn Rotary Encoder with Analog Output Drawing Technische Zeichnung 1 View shows ETX25 without inner teeth washer and hex nut. Mounting Surface Standard shaft dimensions Standard shaft dimensions Shaft length A A Shaft length 22 22 mm mm Shaft diameter D D 6 mm Shaft diameter 6 mm 1,5 -0,20 Tightening torque of h Shipment with inner te Material Limitation according to 2011/65/ The copying, use, distribution or disdosure of the confidentional a strictly prohibited without prior written consent. Any breach shall s rights in the event...

Data Sheet for Panel Encoders 7 4 26 3 Hall-Effect Single-Turn Rotary Encoder with Analog Output Drawing Technische Zeichnung Picture 2 (cable option F) C Mounting Surface Picture 1 (cable option R) roughness of installation surface Cable Cross Section Tightening torque of hex nut ≤ 3N Shipment with inner teeth washe Tightening torque of hex nut ≤ 3Nm Allowed Tolerance Tightening torque of 1000 nut ≤ 3Nm AWG26 hex mm 4 3 5 R Shipment F with inner teeth washer and AWG26 (AF14) hex nut 150 mm Shipment with inner teeth washer Limitation according to(AF14) (RoHS) and Re Material and hex nut 2011/65/EU...

Hall-Effect Single-Turn Rotary Encoder with Analog Output Series ETAM25 Cable and pin assignment Function: Option L and K Option F Option R MEGATRON Elektronik GmbH & Co. KG ■ Hermann-Oberth-Strasse 7 ■ 85640 Putzbrunn / Munich Tel.: +49 89 46094-0 ■ Fax: +49 89 46094-201 ■ www.megatron.de ■ [email protected] Errors and specifications subject to change without notice