Hall-Effect Single-Turn Rotary Encoder with Analog Output Series ETA25 ■ 10 to 100-times longer life compared with potentiometers ■ Analog output (voltage, current) ■ Versatile connecting possibilities ■ Redundant version ■ Several factory programming possibilities The Series ETA25 allows the simple replacement of potentiometers with bushing. The high reliable Hall-Effect technology provides a constant signal quality over the whole life cycle. For critical safety applications a redundant version is available. Electrical Data Effective electrical angle of rotation 1.) Independent linearity (best straight line) 1.) Absolute Linearity 1.) Output signal Resolution Update rate Supply voltage Power consumption (no load) Output load Insulation voltage 1.) Insulation resistance 1.) 15° < a < 360° (programmable in factory), ±0.5° ±0.3 % @ 360° ±0.6 % @ 360° 0...5 V ratiometric 0...10 V 200|js 15...30 V standard <16 mA redundant <23 mA > 5 kOhm Mechanical and Environmental Data Mechanical angle of rotation 1.) Endless Lifetime 2.) > 100 Mio. shaft rotating movements For Option D (with shaft sealing) the sealing is at least working up to 200 000 shaft rotating movements Bearing Sleeve bearing Operational torque without / with X-Ring 0.1 < M < 0.6 Ncm / 0.3 < M < 1.3 Ncm (@ RT, 10 rev./min) Operating temperature range -40..+85 °C (fixed cable) Storage temperature range -40..+105 °C Protection grade front side (IEC 60529) Standard IP40 Option D (with shaft sealing) IP55M, IP66S Protection grade rear side (IEC 60529) Solder- and clamping terminals IP50 (solder pads and connectors excluded) Flat ribbon - and round cable IP66 (end of cable excluded) Vibration (IEC 68-2-6, Test Fc) ±1.5 mm / 20 g / 10 bis 2000 Hz / 16 frequency cycles (3x4 h) Mechanical shock (IEC 68-27, Test Ea) 50 g / 11 ms / halfsine (3x6 shocks) MEGATRON Elektronik GmbH & Co. KG ■ Hermann-Oberth-Strasse 7 ■ 85640 Putzbrunn / Munich Tel.: +49 89 46094-0 ■ Fax: +49 89 46094-201 ■ www.megatron.de ■ [email protected] Specifications are subject to change witho

Data Sheet for Angle Sensors Series ETA25 Hall-Effect Single-Turn Rotary Encoder with Analog Output Max. radial load Mass (product with option L) 2 Fastening parts included in delivery Hex nut (AF14) and tooth washer, if option D is ordered then an additional O-Ring is part of delivery as sealing between mounting panel and rotary encoder. Fastening torque mounting nut Material shaft Stainless steel Material housing Plastic / Bronze EN 61000-4-3 RF sine wave EN 61000-4-6 Conducted sine wave EN 61000-4-8 Power frequency magnetic fields 1.) According IEC 60393 2.) Determined by climatic conditions...

Data Sheet for Angle SensorsHall-Effect Single-Turn Rotary Encoder with Analog OutputOrder Code Description Series ETA25 Shaft diameter, shaft length: Shaft diameter 0 6 mm, shaft length 22 mm Option: Shaft diameter 0 6.35 mm, shaft length 22 mm Option: User defined shaft dimensions [mm] 0 <6.35mm Supply voltage / Output signal: VSUP=5 V (4.5...5.5 V) / OUT=0...5 V (ratiometric) VSUP=24 V (15...30 V) / OUT=0...10 V VSUP=24 V (9...30 V) / OUT=4...20 mA VSUP=24 V (9...30 V) / OUT=0...5 V Sense of rotation: Sense of rotation CW (output signal increases clockwise) Option: CCW (output signal increases...

Hall-Effect Single-Turn Rotary Encoder with Analog Output Series ETA25 Order Code Description Selection: standard=black/bold, possible options=grey/cursive Series ETA25X (X=electric redundant) Shaft diameter, shaft length: Shaft diameter 0 6 mm, shaft length 22 mm Option: Shaft diameter 0 6,35 mm, shaft length 22 mm Option: User defined shaft dimensions [mm] Supply voltage / Output signal: VSUP=5 V (4,5...5,5 V) / OUT=0...5 V (ratiometric) VSUP=24 V (15...30 V) / OUT=0...10 V Sense of rotation, output 1: Sense of rotation CW (output signal increases clockwise) Option: CCW (output signal increases...

Data Sheet for Angle Sensors Hall-Effect Single-Turn Rotary Encoder with Analog Output Additional options For higher quantities or on-going demand, additional options are available as described below on request max. Customized signal characteristic Signal level For example: Special shaft design Special cable and connection design Special torque For Example: minimum/maximum signal level signal plateaus 360° MEGATRON Elektronik GmbH & Co. KG ▪ Hermann-Oberth-Strasse 7 ▪ 85640 Putzbrunn / Munich Tel.: +49 89 46094-0 ▪ Fax: +49 89 46094-201 ▪ www.megatron.de ▪ [email protected] Specifications are...

Data Sheet for Angle Sensors Series ETA25 Hall-Effect Single-Turn Rotary Encoder with Analog Output Technische Zeichnung Drawing 1 View shows ETX25 without inner teeth washer and hex nut. Tightening torque of h Shipment with inner te Material Limitation according to 2011/65/ The copying, use, distribution or disdosure of the confidentional a strictly prohibited without prior written consent. Any breach shall s rights in the event of the grant of a patent or the registration of au Signal sequence Standard shaft dimensions Shaft length A 22 mm Mounting Surface MEGATRON Elektronik GmbH & Co.KG Hermann-Oberth-Str....

Data Sheet for Angle Sensors Mounting Surface Connector Phoenix: Connector Phönix: MCV0,5-5-G2,5 MCV0,5-3-G2,5 FK-MC0,5-5-St2,5 FK-MC0,5-3-St2,5 Mounting Surface 17,8 ±1 Picture 2 (cable option F) Picture 1 (cable option R) Standard Cable Length L roughnessFof installation mm 150 surface 4 The copying, use, distribution or disdosure of the confidentional and proprietary informa strictly prohibited without prior written consent. Any breach shall subject the infringing p Material Limitation according to 2011/65/EU (RoHS) andrights in the event of the grant No.1907/2006 (REACH) or design. Regulation...

Data Sheet for Angle Sensors Series ETA25 Hall-Effect Single-Turn Rotary Encoder with Analog Output Cable- and Pin-assignment ETA25 Function: Cable and pin assignment ETA25X (redundant version) Function: MEGATRON Elektronik GmbH & Co. KG ▪ Hermann-Oberth-Strasse 7 ▪ 85640 Putzbrunn / Munich Tel.: +49 89 46094-0 ▪ Fax: +49 89 46094-201 ▪ www.megatron.de ▪ [email protected] Specifications are subject to change without notice Date: Page: