Data Sheet for Joysticks Series TRY20 Thumb Joystick 3-axis joystick with rotatable knob (2-axis version optional) Particularly low height above the panel (21 mm without rubber boot, 28 mm with rubber boot) Outstanding quality of mechanics and sensors Contactless, wear-free Hall sensor technology Redundant output signals optional IP40 variants (hardcover) and IP54 variants (rubber bellows) available (IP65 optional for 2-axis version) The joysticks of the TRY20 series are unique in their size class on the market thanks to their rotatable knob, which, as a z-axis, enables an additional third, proportional degree of freedom in the application. The industrial joysticks achieve the highest level of quality in terms of mechanics, material and workmanship. The high-quality haptics convey a secure operating feeling and enable the user to precisely control movements in several dimensions. Technical Data Sensor Hall Effect Supply Voltage Independent Linearity Tolerance Return to Center Voltage Expected Life Output Voltages >10 kOhm (>100 kOhm recommended) Insulation Resistance Dielectric Strength Mechanical Angle of Movement X-, Y-Axis Mechanical Angle of Movement Z-Axis Operating Force X-Y-Axis approx. 1.5 N (from center), approx. 3.5 N (full deflection), max. 50 N Operating Torque Z-Axis approx. 0.15 Nm (from center), approx. 0.30 Nm (full deflection) Operating Temperature Storage Temperature Sealing (above panel) Standard with rubber boot: IP54; with hard cover: IP40; IP65 as special version MEGATRON Elektronik GmbH & Co. KG ▪ Hermann-Oberth-Straße 7 ▪ 85640 Putzbrunn / München Tel.: +49 89 46094-0 ▪ www.megatron.de ▪ [email protected] Specifications are subject to change without notice

Data Sheet for Joysticks Series TRY20 Thumb Joystick Please contact us for information regarding stock articles, delivery times and minimum order quantities. Order Code Description Series Axes: Rubber Boot (2 or 3 axes, IP54 (*) ) Hard Cover (2 or 3 axes), IP40 (*) ) Improved sealing (only for 2 axes, IP65 (*) ) Return Mechanism: Spring Return Conical Handle Square Limiter Output Signal: Signal Options: Single Output Dual Output, parallel signals Dual Output, crossed signals (*) Sealing is valid only above panel For higher quantities or on-going demand, additional options are available For example:...

Data Sheet for Joysticks Series TRY20 Thumb Joystick Drawings Panel Arangements Wiring Function X-Axis Dual Output Y-Axis Dual Output Z-Axis Dual Output Termination: wires AWG28, length ca. 300 mm. They are connected to the joystick housing via MOLEX 51021-0800 connector OUT:Xa,Ya,Za（Single output）    :Xb,Yb,Zb（Parallel output） Output voltage OUT:Xb,Yb,Zb （Cross output） center Mechanical rotating angle X・Y:Abt.：±15° Z:Abt.：±30° Note1：The number in （ ）shows connector number. Note2：In ⑴ and GND ⑻ are shown in main circuit board. MEGATRON Elektronik GmbH & Co. KG ▪ Hermann-Oberth-Straße 7 ▪ 85640...