Data Sheet for Angle Sensors Series SPEH Optical incremental Kit Encoder Optical resolution until 1000 pulses per revolution 22 mm housing diameter 11.3 mm housing depth Applicable for shaft diameters from 2 mm to 6.35 mm 2 channels A+B Supply voltage 5 VDC Output TTL or linedriver Integrated MOLEX coupling Very compact kit optical encoder. Thanks to the available mounting tools secure to install. For long shafts a borehole in the rear cover is available. With the integrated MOLEX plug-in connection, the encoder could be easy connected to the evaluation unit. This improves the handling during installation and service. Electrical Data Output signal Line Driver Output voltage high ≥ 2.4 V @ -8 mA with load (4 V @ no load) ≥ 4.75 V @ 25 mA with load (5 V typ. @ no load) ≤ 0.4 V @ 8 mA with load (0.035 V @ no load) ≤ 0.6 V @ 4.5 mA with load (0.25 V typ. @ no load) Differential output voltage Limit frequency Supply voltage Power consumption (no load) Output capacity Output electronics Switch-on delay Line Driver 100 ns (rise time) / 50 ns (fall time) Mechanical and Environmental Data, Miscellaneous Mechanical angle of rotation /stroke 1.) Max. allowed operational speed ≤ 60.000 rpm (in dependence of the amount of pulses per revolution) Formula for calculation: max. rpm = (100000[1/s] x 60[s]) / pulses per rev. Operating temperature range Storage temperature range MEGATRON Elektronik GmbH & Co. KG ▪ Hermann-Oberth-Strasse 7 ▪ 85640 Putzbrunn / Munich Tel.: +49 89 46094-0 ▪ www.megatron.de ▪ [email protected] Errors and specifications subject to change withou

Data Sheet for Angle Sensors Series SPEH Optical incremental Kit Encoder Mechanical and Environmental Data, Miscellaneous Vibration (IEC 68-2-6, Test Fc) Housing diameter / length Housing depth Shaft diameter Shaft type Permissible axial play Permissible eccentricity + radial play Minimum shaft length incl. axial play Maximum shaft length incl. axial play ≤ 10 mm (without borehole in cover) / > 10 mm (with borehole in cover) Connection type Molex coupling Connection position Fastening parts included in delivery Mounting tools consisting of a centering tool and a spacer tool Material housing Material...

Data Sheet for Angle Sensors Series SPEH Optical incremental Kit Encoder Order Code Description Series SPEH Shaft diameter: Option 2 mm Option 2.3 mm Option 2.5 mm Option 3 mm Option 3.175 mm Standard: 4 mm Option 5 mm Standard: 6 mm Option 6.35 mm (1/4") Resolution in pulses per revolution: Standard: 100 ppr. Option 108 ppr. Option 120 ppr. Option 125 ppr. Option 128 ppr. Option 200 ppr. Option 250 ppr. Option 256 ppr. Option 300 ppr. Standard: 360 ppr. Option 400 ppr. Option 500 ppr. Option 512 ppr. Option 720 ppr. Option 800 ppr. Option 1000 ppr. Supply voltage Standard: 5 V Output signal...

Data Sheet for Angle Sensors Series SPEH Optical incremental Kit Encoder For higher quantities or on-going demand, additional options are available as described below For example: Other hub diameters for other shaft diameters Special connector and cable design Line Driver Differential Version PIN 1 Option: Cover Hole for Extended Shafts 7.5 14.61 TTL Version Mating connector Housing: Molex # 51021-0400 Pins: Molex # 50079-8100 Accessory - not included in delivery: Mating connector with 500 mm AWG28 leads Line Driver Differential Version Mating connector Housing: Molex # 51021-0600 Pins: Molex...

Data Sheet for Angle Sensors Optical incremental Kit Encoder Series SPEH Installation instruction Assembly instruction The ESD guidelines must be followed during transport, storage, assembly and operation. Avoid touching the optical sensor and the optical disc in the area of the increments. MEGATRON Elektronik GmbH & Co. KG ▪ Hermann-Oberth-Strasse 7 ▪ 85640 Putzbrunn / Munich Tel.: +49 89 46094-0 ▪ www.megatron.de ▪ [email protected] Errors and specifications subject to change without notice Date: Page:

Data Sheet for Angle Sensors Optical incremental Kit Encoder Series SPEH MEGATRON Elektronik GmbH & Co. KG ▪ Hermann-Oberth-Strasse 7 ▪ 85640 Putzbrunn / Munich Tel.: +49 89 46094-0 ▪ www.megatron.de ▪ [email protected] Date: Page: Errors and specifications subject to change without notice