Optical incremental Encoder Series SPE ■ Optical resolution up to 1000 pulses per revolution ■ 22 mm housing diameter ■ 11.7 mm housing depth ■ Shaft diameters: 6 mm, 6.35 mm, 3.175 mm ■ Ball or sleeve bearing ■ Supply voltage 5 VDC ■ Signal Output TTL ■ Molex Connector Compact optical incremental encoder with a choice of three different operating torques. With the increased torque option, the SPE can also be used as a high quality optical panel encoder. Mechanical and Environmental Data, Miscellaneous Mechanical angle of rotation /stroke 1.) Lifetime 2.) Bearing Max. operational speed Sleeve bearing Ball bearing Max. acceleration Sleeve bearing Ball bearing Operational torque @ RT 1.) 2.) Sleeve bearing with low torque (Version NT) Sleeve bearing with increased torque Ball bearing with very low torque (Version KL) Operating temperature range Storage temperature range Protection grade shaft side (IEC 60529) standard 360° without stop > 1 Mio. shaft revolutions for sleeve bearing Sleeve bearing or ball bearing 100 rev./min 15000 rev./min 10000 rad/sec2 250000 rad/sec2 0.2 Ncm 0.4 ±0,1 Ncm 0.01 Ncm -20 °C up to +100 °C -20 °C up to +100 °C IP40 MEGATRON Elektronik GmbH & Co. KG ■ Hermann-Oberth-Strasse 7 ■ 85640 Putzbrunn / Munich Date: 05/16/2023 Tel.: +49 89 46094-0 ■ www.megatron.de ■ [email protected] Page: 1 of 4 Errors and specifications subject to change without no

Data Sheet for Angle Sensors Series SPE Optical incremental EncoderMechanical and Environmental Data, Miscellaneous Vibration (IEC 68-2-6, Test Fc) Shock (IEC 68-2-27, Test Ea) Housing diameter / length Housing depth Shaft diameter Shaft type Max. radial load Max. shaft load Connection type Connection position Sensor mounting Mass Fastening parts included in delivery Fastening torque mounting nut Material shaft Material housing Material disc Immunity ESD, human body model (MIL-STD-883, Method 3015.8) 20 g / 20 bis 2000 Hz / sine waveform 75 g / 6 ms / halfsine 22 mm 11.73 mm 6 mm, 6.35 mm, 3.175...

Data Sheet for Angle SensorsOptical incremental EncoderOrder code >>> The shaft length depends on the shaft diameter and the shaft bearing. Please refer to the table in the drawing next page - for the shaft length. <<< Description Selection: standard=black/bold, possible options=grey/italic Series SPE Shaft diameter, shaft length: Option 03.17 mm (1/8") x length Standard: 06 mm x length Standard: 06.35 mm (1/4") x length Option shaft length in mm Option shaft length in mm (<6,35 mm) Resolution in pulses per revolution: Standard: 100 ppr. Option 108 ppr. Option 120 ppr. Option 125 ppr. Option...

Optical incremental Encoder Series SPE Drawing Matting Connector: Housing: Molex# 51021-0400 Pins: Molex # 50079-8100 Accessory not included in delivery: Matting connector with 500 mm AWG28 leads Matting Connector: Housing: Molex# 51021-0600 Pins: Molex # 50079-8100 Connection diagram Output waveform MEGATRON Elektronik GmbH & Co. KG ■ Hermann-Oberth-Strasse 7 ■ 85640 Putzbrunn / Munich Tel.: +49 89 46094-0 ■ www.megatron.de ■ [email protected] and specifications subject to change without notice Date: 05/16/2023