Data Sheet for Precision PotentiometerSingleturn Wirewound Potentiometer The S11 potentiometers with servo flange housings are for applications where a wirewound potentiometer with high electrical angle of rotation is required. ■ High electrically effective angle of rotation 355° ±3° ■ On request with mechanical end stop (330°) ■ Multigang-capable up to 5 gangs Effective electrical angle of rotation 1.) Total resistance 1.) Resistance tolerance Independent linearity (best straight line) 1.) Theoretical resolution 1.) Backlash (Hysteresis) 1.) Rotational noise (ENR) 1.) (Method C) Max. / recommended wiper current 1.) Power rating @ 70°C (0W @ 105°C) Insulation Voltage 1.) Insulation Resistance 1.) 355° ±5° 10 Ohm..20 kOhm ±3% (±1%) ±0,3% (±0,2% R > IkOhm) Depends on resistance value (see table below) < 0,5° 100 Ohm 35 mA / 2 |jA 0,5 W 1000 VAC, 1min 1000 MOhm @ 1000 VDC 360° without stop 1 Mio. rotations 40 rev. / min. 2 x ball bearing 1,5 Nmm -20.. + 105°C -55.. + 105°C IP40 15g 10..2000Hz x 12h 49g @ 11 ms x 18 22,23 mm 15 mm 3 mm Solid shaft Mechanical angle of rotation Lifetime (90% el. eff. angle half sine) 2.) Max. operational speed Bearing Operational torque @ ambient temperature 1.) 2. Operating temperature range Storage temperature range Protection grade (IEC 60529) Vibration (IEC 68-2-6, Test Fc) Shock (IEC 68-2-27, Test Ea) Housing diameter Housing depth Shaft diameter Shaft type MEGATRON Elektronik GmbH & Co. KG ■ Hermann-Oberth-Strasse 7 ■ 85640 Putzbrunn / Munich Date: 10/19/2022 Tel.: +49 89 46094-0 ■ www.megatron.de ■ [email protected] Page: 1 of 5 Specifications are subject to change without no

Singleturn Wirewound Potentiometer Series S11 Mechanical Data, Environmental Conditions, Miscellaneous Max. radial load Max. axial load Connection type Connection position Sensor mounting Mass Fastening parts included in delivery Material shaft Material housing <1 N <1 N Gold plated soldering lugs Radial Servo flange 15 g 3 x servo clamps SFN2 Stainless steel Metal 1.) According IEC 60393 2.) Determined by climatic conditions according to IEC 68-1, para. 5.3.1 without load collectives Please note: Max. permissible supply voltage <75 VDC respectively <50 VAC in addition the max. power rating must...

Data Sheet for Precision PotentiometerSingleturn Wirewound PotentiometerOrder code Description Selection: standard=black/bold, possible options=grey/italic Resistance value /Option Tandem: Option 10 Ohm Option 20 Ohm Option 50 Ohm Option 100 Ohm Option 200 Ohm Option 500 Ohm 1 kOhm Option 2 kOhm 5 kOhm 10 kOhm Option 20 kOhm Option rear shaft: Standard 03,00 x 10 mm Shaft length in mm Shaft diameter in mm (<3 mm) Resistance tolerance: Independent linearity: ±0,3% Option ±0,2% R > 1kOhm Option center tap: Front shaft: Standard 03,00 x 11,5 mm Option shaft diameter 3,175 mm Option shaft length...

Data Sheet for Precision Potentiometer Series S11 Singleturn Wirewound Potentiometer Mounting surface Pitch circle A =Ø29,5±0,2 Dimensions in mm MEGATRON Elektronik GmbH & Co. KG ▪ Hermann-Oberth-Strasse 7 ▪ 85640 Putzbrunn / Munich Tel.: +49 89 46094-0 ▪ www.megatron.de ▪ [email protected] Specifications are subject to change without notice Date: Page:

Data Sheet for Precision PotentiometerSingleturn Wirewound PotentiometerOn Request: Special machining on shaft Slot Counterbore hole Counterbore screw hole Screw Thread Screw thread inside hole MEGATRON Elektronik GmbH & Co. KG ■ Hermann-Oberth-Strasse 7 ■ 85640 Putzbrunn / Munich Date: 10/19/2022 Tel.: +49 89 46094-0 ■ www.megatron.de ■ [email protected] Page: 5 of 5 Specifications are subject to change without notice