Data Sheet for Panel Encoders Series MRX50 Optoelectronic Panel Encoder Standard with solder lugs Compact design, ideal for small installation spaces Resolution 50 pulses per revolution Lifespan more than 1 mio. shaft revolutions IP protection grade from shaft side until IP65 Various electrical connection variants Supply voltage 5 V or 3,3 V The sum of the properties makes the MRX50 particularly interesting for use in control panels, where a limited installation space, a finely graduated value-setting coupled with a long product life, is required. Based on an optional shaft sealing this manual encoder is also suitable for applications with increased environmental requirements. V3 - with socket for plug V4 - flat band cable with soldering aid Electrical Data Sensor with detent Output signal Output voltage high Limit frequency Supply voltage Power consumption (no load) Insulation voltage 1.) Insulation resistance 1.) Output electronics Switch-on delay Mechanical and Environmental Data Sensor with detent with detent and switch Mechanical angle of rotation /stroke 1.) Number of detents per revolution Lifespan 2.) 360° without stop 50 (50 pulses per rev.) > 1 Mio. shaft revolutions Bearing Operational torque / detent torque: With detent standard torque With detent high torque Operating temperature range Storage temperature range Protection grade shaft (IEC 60529) With shaft sealing option D (only from shaft side) MEGATRON Elektronik GmbH & Co. KG ▪ Hermann-Oberth-Strasse 7 ▪ 85640 Putzbrunn / Munich Tel.: +49 89 46094-0 ▪ www.megatron.de ▪ [email protected] Errors and specifications subject to change without notice

Data Sheet for Panel Encoders Series MRX50 Optoelectronic Panel Encoder Mechanical and Environmental Data Sensor with detent with detent and switch Housing diameter / length Housing depth Shaft diameter Shaft type Connection type Solid shaft Solder lugs, socket for plug, flat band cable with soldering aid (plug) Connection position Sensor mounting Fastening parts included in delivery Hex nut (AF11), flat washer and tooth washer For option D with additional sealing ring Fastening torque mounting nut Material shaft Material housing Brass Aluminium die Casting Material disc Stainless steel Electrical...

Data Sheet for Panel Encoders Series MRX50 Optoelectronic Panel Encoder Order Code Description Selection: standard=black/bold, possible options=grey/cursive Detent: With detent without push button switch With detent with push button switch Pulses per revolution: 50 pulses (detent) per revolution Supply voltage: Standard 5 V Option 3.3 V Standard Output signal: A+B Shaft sealing: Standard without shaft sealing Option D with shaft sealing Operational torque: Standard torque 0.4 ±0.2 Ncm Option increased torque: 0.8 ±0.2 Ncm Electrical connection: Standard solder lugs Option contact pin´s backside...

Data Sheet for Panel Encoders Series MRX50 Optoelectronic Panel Encoder Drawing Cable for V3 (for V3V3 (for V3 not included in delivery). Cable for V4 and not included in delivery) Order P/N #127581 Order P/N #127581 Dimensions in mm MEGATRON Elektronik GmbH & Co. KG ▪ Hermann-Oberth-Strasse 7 ▪ 85640 Putzbrunn / Munich Tel.: +49 89 46094-0 ▪ www.megatron.de ▪ [email protected] Errors and specifications subject to change without notice Date: Page: