Data Sheet for Panel Encoders Series MRB Optoelectronic Panel Encoder MRB V2 Solder pins to rear MRB V6 With flatband cable Very compact design, ideal for small installation spaces Choice of different operational torques for bearing Choice of different operational forces for push button switch 25 or 16 pulses per revolution With 5V supply voltage low power consumption ≤10 mA From shaft side IP protection grade IP55 With or without detent, push button switch Various electrical connection variants MRB V5 Solder pins to front The extremely compact MRB series offers thanks to a wide range of options a high compatibility for a lot of applications. The powerful pricing structure makes this panel encoder also interesting for low end applications. MRB with solder lugs Electrical Data Sensor without detent without detent with switch with detent Output signal with detent and switch Output voltage high @ Supply Voltage 3.3V ≥ (Supply Voltage -0.3V) / @ Supply Voltage 5V ≥ (Supply Voltage -0.5V) @Supply Voltage 3.3V / 5V ≥ (Supply Voltage -0.5V) Limit frequency Supply voltage 5 V ±10%, 3.3 V ±10% Supply Voltage 3.3V < 20 mA Supply Voltage 5V < 10 mA Power consumption (no load) Insulation voltage 1.) Output electronics Mechanical and Environmental Data Sensor without detent Mechanical angel of rotation /stroke 1.) Number of detents per rev. Lifespan 2.) without detent with switch with detent and switch 360° without stop 25 (25 detents per rev.) / 16 (16 detents per rev.) > 1 Mio. shaft revolutions (High Torque > 0,1 Mio. Udr.) Bearing Operational torque / detent torque Without detent With detent light torque With detent standard torque With detent medium torque With detent high torque with detent Operating temperature range Storage temperature range Protection grade shaft side standard (IEC 60529) Option D (with shaft sealing) MEGATRON Elektronik GmbH & Co. KG ▪ Hermann-Oberth-Strasse 7 ▪ 85640 Putzbrunn / Munich Tel.: +49 89 46094-0 ▪ Fax: +49 89 46094-201 ▪ www.megatron.de ▪ [email protected] Errors and specifications subject to chan

Data Sheet for Panel Encoders Series MRB Optoelectronic Panel Encoder Mechanical and Environmental Data Sensor without detent without detent with switch with detent with detent and switch Sine wave vibration with a swing speed of 10 to 55 to 10 Hz for 1 minute and a total amplitude of 1.5 mm is added in the 3 axis direction for each axis for 2 hours. The axis shall be in the horizontal position. (5.9 to 176 m / equivalent) Apply regular sine half wave impact with peak acceleration 490 m/s² (50 G) working time 11 ms to each of three directions in six directions. Mechanical and Environmental Data...

Data Sheet for Panel Encoders Series MRB Optoelectronic Panel Encoder Order Code Description Selection: standard=black, possible options=grey/cursive Detent: Without detent With detent Taster: Without detent With push button switch standard 3.2 ±1N Option push button switch medium 4 ±1 N Option push button switch high 5 ±1 N Pulses per revolution: 25 pulses (detent) per revolution Option 16 pulses (detents) per revolution Supply voltage: 5V 3.3 V Output signal: A+B Shaft sealing: Standard without shaft sealing Option D with shaft sealing Electrical connection: Standard with solder lugs Solder...

Data Sheet for Panel Encoders Series MRB Optoelectronic Panel Encoder Technische Zeichnung Drawing MRB without push button - standard MRB without push button - V2 MRB without push button - V5 MRB without push button - V6 MEGATRON Elektronik GmbH & Co. KG ▪ Hermann-Oberth-Strasse 7 ▪ 85640 Putzbrunn / Munich Tel.: +49 89 46094-0 ▪ Fax: +49 89 46094-201 ▪ www.megatron.de ▪ [email protected] Errors and specifications subject to change without notice Date: Page:

Data Sheet for Panel Encoders Series MRB Optoelectronic Panel Encoder Drawing MRB with push button (T) - standard MRB with push button (T) - V2 MRB with push button (T) - V5 MRB with push button (T) - V6 MEGATRON Elektronik GmbH & Co. KG ▪ Hermann-Oberth-Strasse 7 ▪ 85640 Putzbrunn / Munich Tel.: +49 89 46094-0 ▪ Fax: +49 89 46094-201 ▪ www.megatron.de ▪ [email protected] Errors and specifications subject to change without notice Date: Page:

Data Sheet for Panel Encoders Series MRB Optoelectronic Panel Encoder Drawing Mounting hole dimension (mm): Mounting hole dimensions (mm) PCB mounting hole dimensions (mm): PWB mounting hole dimensions (mm) MRB without push push V5 MRB without button button: MRB without push push V2 MRB without button button: MRB with push button V5 MRB(C)T with push MRB with push button V2 MRB(C)T with push MRB without push button MRB(C)T with push button Circuit Without push button 5V Without push button 3.3V With push button 5V MEGATRON Elektronik GmbH & Co. KG ▪ Hermann-Oberth-Strasse 7 ▪ 85640 Putzbrunn...