Optical Encoders Series MHL40 ■ Optical resolution 10 bis 5000 pulses per revolution ■ Metal housing, ball bearing ■ 40mm housing diameter ■ 6, 8, 10, 12 mm shaft diameter ■ Output: NPN, open collector, linedriver, push pull ■ 2m signal cable Spring plate mounting reduces the effects of radial and axial shaft eccentricity. The robust design of the MHL40 has been proven in hundreds of applications over many years. Where high reliability and long life are required, the MHL40 is recommended. MEGATRON Elektronik GmbH & Co. KG ■ Hermann-Oberth-Strasse 7 ■ 85640 Putzbrunn / Munich Tel.: +49 89 46094-0 ■ www.megatron.de ■ [email protected] Errors and specifications subject to change without notice

Data Sheet for Angle SensorsOptical Encoders Series MHL40Mechanical and Environmental Data, Miscellaneous Mechanical angle of rotation/stroke 1.) Bearing Max. operational speed Operational torque @ RT 1.) 2.) 1.) According IEC 60393 2.) Determined by climatic conditions according to IEC 68-1, para. 5.3.1 without load collectives MEGATRON Elektronik GmbH & Co. KG ■ Hermann-Oberth-Strasse 7 ■ 85640 Putzbrunn / Munich Date: 05/15/2023 Tel.: +49 89 46094-0 ■ www.megatron.de ■ [email protected] Page: 2 of 6 Errors and specifications subject to change without notice

Data Sheet for Angle SensorsOptical Encoders Order Code (*) The option VSUP 5 V can be linked to a minimum order quantity in conjunction with the options B, K, NPN. Please inquire the minimum order quantity in combination with the desired product order code from MEGATRON. MEGATRON Elektronik GmbH & Co. KG ■ Hermann-Oberth-Strasse 7 ■ 85640 Putzbrunn / Munich Date: 05/15/2023 Tel.: +49 89 46094-0 ■ www.megatron.de ■ [email protected] Page: 3 of 6 Errors and specifications subject to change without notice

Optical Encoders Series MHL40 Order example MHL40 Requirement: Shaft diameter 6 mm, resolution 360 pulses per revolution, supply voltage 12..24 V, 2 channels A+B and Index, output electronics line driver, without through-hole, 2 m signal cable length Example for order code: MHL40 6 360 1224 BZ N A For higher quantities or on-going demand, additional options are available as described below For example: ■ Other resolutions ■ Special cable length ■ Special cable and connector design MEGATRON Elektronik GmbH & Co. KG ■ Hermann-Oberth-Strasse 7 ■ 85640 Putzbrunn / Munich Tel.: +49 89 46094-0 ■ www.megatron.de...

Data Sheet for Angle SensorsOptical EncodersDrawing Totem pole output / NPN open collector output / Voltage output Black: OUT A White: OUT B Orange: OUT Z Brown: +V (5VDC, 12-24VDC ±5%) Blue: GND (0V) Shield: F.G. Totem pole output / NPN open collector output / Voltage output Line driver output Line driver output Black: OUT_A Red: OUT A White: OUT_B Gray: OUT B Orange: OUT_Z Yellow: OUT Z Brown: +V (5VDC, 12-24VDC ±5%) Blue: GND (0V) Shield: F.G. Totem pole output/ NPN open collector output/ Voltage output F.G. (field ground): It should be grounded separately. The metal case and shield wire of...

Data Sheet for Angle Sensors Series MHL40 Optical Encoders Output Diagram Push Pull output - Option: B Totem pole output Open open collector output NPN Collector output - Option: K Voltage output - Option: NPN output Linedriver output - Option: N Line driver output Rotary encoder circuit Load connection Rotary encoder circuit Load connection Rotary encoder circuit Load connection Output Source current : Max. 10mA 0V Load Output Output Load Main circuit Main circuit Main circuit Rotary encoder circuit Load connection Totem pole output type can be used for NPN open collector output type ( _ or...