Data Sheet for Linear Sensors Series MBX Potentiometric Linear Transducer Measurement stroke 50..200 mm Flat design (Height < 7 mm) Short length (No push rod needed) Infinite resolution (Conductive plastic potentiometer) Absolute measurement signal without processing delay Because of the low profile design and the compact wiper carrier part (no push rod is needed) this sensor gives the best opportunity for integration into space saving applications. Caused by the potentiometric measurement principle that needs no signal processing electronics, the absolute measurement signal is immediately available after power on and without delay and infinite resolution meanwhile operation. Electrical Data Effective electrical travel 1.) Nominal total resistance 1.) Independent linearity (best straight line) 1.) Max. / recommended wiper current 1.) Mechanical Data, Environmental Conditions, Miscellaneous Mechanical Stroke 1.) Lifetime (90% el. effective stroke) 2.) Sleeve bearing Starting force @ ambient temperature 1.) 2.) Operating temperature range Storage temperature range Shock (IEC 68-2-27, Test Ea) Housing length Mass ca. Fastening parts (not included in delivery) Material groove / slider Connection type Screws M3 ISO7380 Aluminium / engineering plastic Single leads AWG22 ca. 175 mm 1.) According IEC 60393 2.) Determined by climatic conditions according to IEC 68-1, para. 5.3.1 without load collectives Please note: Max. permissible supply voltage <75 VDC respectively <50 VAC in addition the max. power rating must be observed MEGATRON Elektronik GmbH & Co. KG ▪ Hermann-Oberth-Strasse 7 ▪ 85640 Putzbrunn / Munich Tel.: +49 89 46094-0 ▪ www.megatron.de ▪ [email protected] Specifications are subject to change withou

Data Sheet for Linear Sensors Series MBX Potentiometric Linear Transducer Order Code Description Series: Effective electrical travel (±0,3 mm): Option 50 mm 100 mm 150 mm 200 mm Selection: standard=black/bold, possible options=grey/cursive MBX 50 100 150 200 Nominal total resistance: Depends on electrical travel Resistance tolerance: ±30% Tolerance independent linearity: ≤ ±1% Electrical connection: Single leads (standard length 175 mm) Option leads length in m For higher quantities or on-going demand, additional options are available as described below For example: Special electrical effective...

Data Sheet for Linear Sensors Series MBX Potentiometric Linear Transducer Drawing 3+1mm dismantled, and tinned (leadfree) stranded wire size AWG22 isolation ULPVC Clamping length Klemmlänge effective electrical travel L2 0,3 The leads have to be fastened about 40 mm distance to the profile especially in case of vibration or shock total electric travel L3 0,3 Rev. 00 mounting surface planarity B=(S1-8mm) 0,15 suitable screws M3 (ISO 7380) max. torque 0,5Nm MEGATRON Elektronik GmbH & Co. KG ▪ Hermann-Oberth-Strasse 7 ▪ 85640 Putzbrunn / Munich Tel.: +49 89 46094-0 ▪ www.megatron.de ▪ [email protected]...