Data Sheet for Angle Sensors Series MAB12AH Hall-Effect Single-Turn Rotary Encoder with Analogue Output Only 12.7 mm housing diameter Suitable for shaft diameters from 2 mm..6.35 mm Mounting ring and push on magnet are part of delivery Supply voltage 5 VDC Output signal analogue absolute or PWM Integrated MOLEX connector Extreme compact Hall Kit Encoder delivered as complete ready to setup package. The Package consisting of the encoder a mounting ring and the matching magnet holder and magnet for the shaft. With the MOLEX plug-in connection, the encoder could be easy connected to the evaluation unit. This improves the handling during installation and service. Electrical Data Effective electrical angle of rotation Independent linearity (best straight line) Output signal Update rate Supply voltage Power consumption (no load) Output load Mechanical and environmental data, Miscellaneous Mechanical angle of rotation 1.) Lifetime 2.) 360° without stop Mechanically unlimited Operating temperature range Storage temperature range Housing diameter Housing depth Shaft diameter Shaft type Push on magnet for solid shafts MEGATRON Elektronik GmbH & Co. KG ▪ Hermann-Oberth-Strasse 7 ▪ 85640 Putzbrunn / Munich Tel.: +49 89 46094-0 ▪ www.megatron.de ▪ [email protected] Errors and specifications subject to change without notice

Data Sheet for Angle Sensors Series MAB12AH Hall-Effect Single-Turn Rotary Encoder with Analogue Output Mechanical and Environmental Data, Miscellaneous Connection type Molex plug on sensor: 53398-0371 Connection position Sensor mounting Mass Fastening parts included in delivery Mounting ring Magnet + magnet holder + kit encoder + mounting ring: app. 20 g Kit Encoder, mounting ring, push on magnet Not included in delivery: 2 pcs. lens head screws 4-40 1/4" for mounting of the mounting ring Fastening torque of the mounting screws for mounting ring Material mounting ring Material housing Material...

Data Sheet for Angle Sensors Series MAB12AH Hall-Effect Single-Turn Rotary Encoder with Analogue Output Order Code Description Selection: standard=black/bold, possible options=grey/italic Shaft diameter: Option Ø2 mm Option Ø2.3 mm Option Ø2.5 mm Option Ø3 mm Option Ø3.17 mm Option Ø4 mm Option Ø5 mm Ø6 mm Option Ø6.35 mm Resolution: Supply voltage / Output signal: Standard: VSUP=5 V ±10 % / OUT=0...5 V Option: 1 VSUP=5 V ±10 % / PWM, Resolution 12 Bit Option: 2 VSUP=5 V ±10 % / PWM, Resolution 10 Bit Sense of rotation: Standard: CW (output signal (analog) or duty cycle (PWM) increases clockwise)...

Data Sheet for Angle Sensors Series MAB12AH Hall-Effect Single-Turn Rotary Encoder with Analogue Output Drawing Leading edge of the shaft Terminal lay-out and connector Pin 1 +5VDC Pin 2 Analog Out Pin 3 GND Connector in the sensor: Molex # 53398-0371 Counter connector housing: Molex # 51021-0300 Crimp pins for counter conn.: Molex # 50079-8100 Crimp tools: Molex # 50079 Please take care ! That the max. allowed axial mounting tolerances from the leading edge of the shaft to the mounting surface are 5.6 +0.8/-0.4 mm Leaving the tolerance band lead to signal loss and malfunction of the encoder....

Data Sheet for Angle Sensors Hall-Effect Single-Turn Rotary Encoder with Analogue Output Mounting Instruction During transport, storage, assembly and operation, it must be followed the ESD guidelines. MAE3 Assembly Instructions Step 1: Slip push-on magnetic hub over shaft and firmly press down until top of shaft fills cavity of hub. Slip push-on magnetic hub over shaft and firmly press down until top of shaft fills cavity of hub. Step 2: Place encoder body over shaft assembly so that it sits on mounting surface. Step 2: Place encoder body over shaft assembly so that Step sits on mounting surface....