*mydirectindustry

Data sheet MAB12A
1 /4Pages

Catalog excerpts

Data Sheet for Angle SensorsHall-Effect Single-Turn Rotary Encoder with Analogue Output ■ Only 12.2 mm housing diameter ■ Sleeve bearing or ball bearing ■ 6 mm, 6.35mm or 3.175mm shaft diameter ■ Supply voltage 5 VDC ■ Output signal analogue absolute or PWM ■ Integrated MOLEX coupling Very compact magnetic absolute encoder. Easy to mount by central thread with hex nut. With the MOLEX plugin connection, the encoder could be easy connected to the evaluation unit. This improves the handling during installation and service. MEGATRON Elektronik GmbH & Co. KG ■ Hermann-Oberth-Strasse 7 ■ 85640 Putzbrunn / Munich Tel.: +49 89 46094-0 ■ www.megatron.de ■ [email protected] Errors and specifications subject to change without not

Open the catalog to page 1

Hall-Effect Single-Turn Rotary Encoder with Analogue Output Series MAB12A Mechanical and Environmental Data, Miscellaneous Human Body Model MIL-STD-883E, Method 3015.7 ± 2 kV 1.) According IEC 60393 2.) Determined by climatic conditions according to IEC 68-1, para. 5.3.1 without load collectives MEGATRON Elektronik GmbH & Co. KG ■ Hermann-Oberth-Strasse 7 ■ 85640 Putzbrunn / Munich Tel.: +49 89 46094-0 ■ www.megatron.de ■ [email protected] Errors and specifications subject to change without notice

Open the catalog to page 2

Data Sheet for Angle SensorsHall-Effect Single-Turn Rotary Encoder with Analogue OutputOrder Code Description Selection: standard=black/bold, possible options=grey/italic Shaft diameter / shaft length: Standard: 06 x 17.1 mm (not available in combination with ball bearing) Option: 06.35 x 17.1 mm (not available in combination with ball bearing) Option: 03.17 x 17.1 mm length with sleeve bearing Option: 03.17 x 17.3 mm length with ball bearing Option: user defined shaft length [mm] (*) Supply voltage / Output signal: Standard: VSUP=5 V ±10 % / OUT=0...5 V (ratiometric resolution 10Bit) Option:...

Open the catalog to page 3

Data Sheet for Angle Sensors Series MAB12A Hall-Effect Single-Turn Rotary Encoder with Analogue Output Drawing Star washer (included) Analog Output: Analog output Terminal lay-out and connector Pin 1 +5VDC Pin 2 Analog Out Pin 3 GND Connector in the sensor: Molex # 53398-0371 Counter connector housing: Molex # 51021-0300 Crimp pins for counter conn.: Molex # 50079-8100 Crimp tools: Molex # 50079 MEGATRON Elektronik GmbH & Co. KG ▪ Hermann-Oberth-Strasse 7 ▪ 85640 Putzbrunn / Munich Tel.: +49 89 46094-0 ▪ www.megatron.de ▪ [email protected] Errors and specifications subject to change without notice...

Open the catalog to page 4