Data sheet HSM22M
7Pages

Catalog excerpts

Data Sheet for Angle Sensors Series HSM22M Hall-Effect Multi-Turn Rotary Encoder 10 turn (=3600°) Hall rotary encoder True-Power-On Compact Ø22.5 mm housing Ø6 mm Shaft Sleeve bearing 5 V, 12 V or 24 V supply voltage Voltage or current output As option with redundant output electronic High reliability in measurement value capturing and processing The rotary encoders from the HSM22M series are real "True-Power-On" multiturn encoders, in which the output signal always corresponds to the angle of rotation, even if the angle of rotation changes during loss of supply voltage. In the comparison to other multiturn rotary encoder technologies and signal evaluation processing methods the MEGATRON HSM22M ensures the highest level of reliability and failure safety. Electrical Data Effective electrical angle of rotation 1.) Standard 3600°±7°, As option programmable ex works 360° ≤ α ≤ 3600° ±7° Independent linearity (best straight line) 1.) Output signal ±0.5 % @3600° Voltage output: @ VSUP 5 V Output voltage: 5 % ±3 %..95 % ±3 % ratiometric @ VSUP 24 V or 12 V Output voltage: 5 % ±3 %..95 % ±3 % Update rate Supply voltage With voltage output: 5 VDC ±0.5 V 12 VDC ±0.5 V 24VDC ±0.5 V With current output: 24 VDC ±0.5 V Power consumption (no load) Voltage output: < 16 mA (single) < 32 mA (redundant) Output load Insulation voltage Insulation resistance 1.) ±8 kV contact discharge, ±16 kV arial discharge (IEC 61000-4-2) >1000 MΩ @ 500 VDC Mechanical and Environmental Data Mechanical angle of rotation 1.) Lifetime 360° without stop > 20 mio. shaft revolutions Bearing Max. operational speed Sleeve bearing 400 rev./min Operating temperature range Storage temperature range Protection grade front side (IEC 60529) MEGATRON Elektronik GmbH & Co. KG ▪ Hermann-Oberth-Strasse 7 ▪ 85640 Putzbrunn / Munich Tel.: +49 89 46094-0 ▪ www.megatron.de ▪ info@megatron.de Specifications are subject

Open the catalog to page 1

Data Sheet for Angle Sensors Series HSM22M Hall-Effect Multi-Turn Rotary Encoder Mechanical and Environmental Data, Miscellaneous Vibration (IEC 68-2-6, Test Fc) Housing diameter / length Housing depth Shaft diameter Shaft type 6 mm Solid shaft with shaft flattening Max. allowed radial load Max. allowed axial load Connection type ≤1 N All variants with voltage output: Single strands 180 mm ± 20 mm Variant with current output: solder terminals Connection position Sensor mounting Mass Fastening parts included in delivery Fastening torque mounting nut Material shaft Material housing < 100 Ncm...

Open the catalog to page 2

Data Sheet for Angle Sensors Series HSM22M Hall-Effect Multi-Turn Rotary Encoder Order Code for single output version (non redundant version) Description Series: Multiturn: Shaft diameter / shaft length: Ø 6.00 x 23.1 mm Option: user defined shaft dimensions [mm] (shaft diameters > 6.00 mm are designed as two part shaft) Selection: Standard=black/bold, possible options=grey/cursive HSM22 M 6x23.1 XxXX Supply voltage / output signal: VSUP=5 V ±10 % / output voltage: 5 % ±3%..95 % ±3 % from VSUP (ratiometric) Option: VSUP 12 V ±0.5 V Output voltage: 0.6 V ±0.36 V..11.4 ±0.36 V Option: VSUP 24...

Open the catalog to page 3

Data Sheet for Angle Sensors Series HSM22M Hall-Effect Multi-Turn Rotary Encoder Order Code for redundant Version Description Series: Multiturn: Selection: standard=black, possible options=grey/cursive HSM22 M Redundant electronic: Galvanically insulated electronic (2 separate supply Galvanically not insulated electronics (one supply voltage, voltages, 2 separate grounds, =6 electrical connection cables [VSUP1, VSUP2, Ground 1, Ground 2, Out 1, Out 2 ) one ground, =4 electrical connection cables [1xVSUP, 1xGround, Out 1, Out2]) Shaft diameter / shaft length: Ø 6.00 mm x 23.1 mm Option: user...

Open the catalog to page 4

Data Sheet for Angle Sensors Series HSM22M Hall-Effect Multi-Turn Rotary Encoder Drawing HSM22M version with voltage output 0505 or 1212 or 2424 electronic with single strands as electrical connection 3 Lead wires (PVC 0.18 mm²) / (4 wires in case of dual output) / (6 wires in case of dual independent output) ・Output type・・・・・・・・・・・・・・・・・・・・・・・・・ Single output ・Mechanical rotating angle・・・・・・・・・・・・・・ 360° (Endless) ・Starting torque・・・・・・・・・・・・・・・・・・・・・・・ Below 5 mN･m （50 gf･cm） 10 ・Current consumption・・・・・・・・・・・・・・・・・・ Below 22 mA ・Independent linearity tolerance・・・・・・・・・・ Within ±0.5 %FS...

Open the catalog to page 5

Note:Rotational Life Expectancy may differ from the specifications depending on status of use. Data Sheet for Angle Sensors Series HSM22M B part only) Hall-Effect Multi-Turn Rotary Encoder Connection Diagrams for Single Strands ● Terminal Connection Diagram Single electronic: 1 electrical output Single output Redundant electronics X2: 2 electrical outputs galvanicallyDual output not insulated Redundant electronics X1: 2 electrical outputs Dual Independent galvanically insulated output (In case of the potentiometer with special specifications, the general specifications and environmental...

Open the catalog to page 6

Rotating Torque Note:Rotational Life Expec depending on status o Backlash Within 10° Data Sheet for Angle Sensors Dielectric Strength Insulation Resistance OUT A Redundant outputs X1 or X2 with sense of rotation: CW, CW OUT B (In case of a parallel output) Note : 1 pc. each of inner teeth washer Dual Indepen attached. From supply voltage: 5%±3% 5% ±3% Electrical rotating angle 3600° ±7° →CW OUT B Redundant outputs X1 or IN(In case of a cross output)X2 with sense of rotation: CW, CCW ● Special Specifications Available 23.1 ±1 (In case of the potentiometer with sp and environmental...

Open the catalog to page 7

Data sheet HSM22M 7Pages

Catalog excerpts

All MEGATRON Elektronik GmbH & Co. KG catalogs and technical brochures

Data sheet HSM22M
7Pages