Data Sheet for Precision Potentiometer Series HH17/19 Multiturn Hybrid Potentiometer The HH(R)17/19 potentiometers in 22 mm housing are suitable for applications where a long life and very high-resolution multiturn potentiometer is important. Electrical Data Effective electrical angle of rotation 1.) Total resistance 1.) Very high-resolution and long-lasting due to hybrid technology Very clean signal - no winding jumps thanks to hybrid technology Simplified installation due to connector version Version HHR17/19 with integrated slipping clutch The high-resolution precision potentiometers of the HH(R)17/19 series have a wire-wound resistor element, which is finished with a conductive plastic layer. Thus the so-called winding jumps are omitted and the resolution is almost infinite. Due to the smooth surface of the resistance element, the hybrid potentiometer has a significantly longer life and qualifies it as a position feedback in closed loop control circuits. The shaft diameters is Ø6,35 / Ø6.00 mm (HH(R)17/HH(R)19) and is equipped with a screwdriver slot. In addition, an optional integrated slipping clutch protects the potentiometer from damage by overrunning the end stops and facilitates the zero point adjustment. The potentiometer is available in a 3, 5 or 10 turn version. The radial gold-plated connection pins are suitable for flat connectors (2.8 mm according to DIN 46247 part 3) and the connector version simplifies the mounting. Resistance tolerance Independent linearity (best straight line) 1.) Nearly infinite Max. / recommended wiper current 1.) Power rating @ 70°C (0W @ 105°C) Mechanical angle of rotation Lifetime (90% el. eff. angle half sine) 2.) Mechanical Data, Environmental Conditions, Miscellaneous Brass bearing Operational torque @ ambient temperature 1.) 2.) Operating temperature range Storage temperature range Protection option D shaft sealing (IEC 60529) Housing diameter Housing depth Shaft diameter (HH17/19) Shaft type MEGATRON Elektronik GmbH & Co. KG ▪ Hermann-Oberth-Strasse 7 ▪ 85640 Putzbrunn / Munich Tel.: +49 89 46094-0 ▪ www.megatron.de ▪ [email protected] Specifications are subject to change without notice

Data Sheet for Precision Potentiometer Series HH17/19 Multiturn Hybrid Potentiometer Mechanical Data, Environmental Conditions, Miscellaneous Connection type Gold plated soldering lugs, integrated connector Connection position Sensor mounting Mass Fastening parts included in delivery Fastening torque mounting nut Material shaft Material housing Stainless steel Reinforced fibreglass PA66 1.) According IEC 60393 2.) Determined by climatic conditions according to IEC 68-1, para. 5.3.1 without load collectives Please note: Max. permissible supply voltage <75 VDC respectively <50 VAC in addition the...

Data Sheet for Precision Potentiometer Series HH17/19 Multiturn Hybrid Potentiometer Order code Description Selection: standard=black/bold, possible options=grey/cursive Slipping clutch: Without additional mechanics With integrated slipping clutch Shaft diameter: Ø 6,35 mm Ø 6,00 mm Revolutions with stop: Option 3-turn Option 5-turn 10-turn Resistance value / Option Tandem: Option 1 kOhm (only 3 and 5-turn) Option 2 kOhm 5 kOhm 10 kOhm Option 20 kOhm Option 50 kOhm Option 100 kOhm (only 10 Turn) Option rear shaft: HH(R)17 = Ø6,35 x 15 mm HH(R 19) = Ø6,00 x 15 mm Shaft length in mm Shaft diameter...

Data Sheet for Precision Potentiometer Series HH17/19 Multiturn Hybrid Potentiometer Drawing Mounting surface 3/8"-32 UNEF Option rear shaft extension Option multiganged 7,9 Connector Version MEGATRON Elektronik GmbH & Co. KG ▪ Hermann-Oberth-Strasse 7 ▪ 85640 Putzbrunn / Munich Tel.: +49 89 46094-0 ▪ www.megatron.de ▪ [email protected] Specifications are subject to change without notice Date: Page

Data Sheet for Precision Potentiometer Series HH17/19 Multiturn Hybrid Potentiometer On Request: Special machining on shaft ±0.05 Counterbore hole Double side flat L Counterbore screw hole Screw Thread Screw thread inside hole M MEGATRON Elektronik GmbH & Co. KG ▪ Hermann-Oberth-Strasse 7 ▪ 85640 Putzbrunn / Munich Tel.: +49 89 46094-0 ▪ www.megatron.de ▪ [email protected] Specifications are subject to change without notice Date: Page: