Data sheet ETA25
8Pages

Catalog excerpts

Data Sheet for Angle Sensors Series ETA25 Hall-Effect Single-Turn Rotary Encoder with Analog Output 10 to 100-times longer life compared with potentiometers Analog output (voltage, current) Versatile connecting possibilities Redundant version Several factory programming possibilities ETA25 - R The Series ETA25 allows the simple replacement of potentiometers with bushing. The high reliable Hall-Effect technology provides a constant signal quality over the whole life cycle. For critical safety applications a redundant version is available. ETA25 - L Electrical Data Effective electrical angle of rotation Independent linearity (best straight line) Absolute Linearity Output signal Update rate Supply voltage Power consumption (no load) Output load Insulation voltage Insulation resistance Mechanical and Environmental Data Mechanical angle of rotation Lifetime Endless > 100 Mio. shaft rotating movements For Option D (with shaft sealing) the sealing is at least working up to 200 000 shaft rotating movements Sleeve bearing Operational torque without / with X-Ring Operating temperature range Storage temperature range Protection grade front side (IEC 60529) Standard Option D (with shaft sealing) Protection grade rear side (IEC 60529) Solder- and clamping terminals Flat ribbon - and round cable IP50 (solder pads and connectors excluded) IP66 (end of cable excluded) Mechanical shock (IEC 68-27, Test Ea) MEGATRON Elektronik GmbH & Co. KG ▪ Hermann-Oberth-Strasse 7 ▪ 85640 Putzbrunn / Munich Tel.: +49 89 46094-0 ▪ www.megatron.de ▪ info@megatron.de Specifications are s

Open the catalog to page 1

Data Sheet for Angle Sensors Series ETA25 Hall-Effect Single-Turn Rotary Encoder with Analog Output Max. radial load Mass (product with option L) 2 Fastening parts included in delivery Hex nut (AF14) and tooth washer, if option D is ordered then an additional O-Ring is part of delivery as sealing between mounting panel and rotary encoder. Fastening torque mounting nut Material shaft Stainless steel Material housing Plastic / Bronze EN 61000-4-3 RF sine wave EN 61000-4-6 Conducted sine wave EN 61000-4-8 Power frequency magnetic fields 1.) According IEC 60393 2.) Determined by climatic...

Open the catalog to page 2

Data Sheet for Angle Sensors Series ETA25 Hall-Effect Single-Turn Rotary Encoder with Analog Output Order Code Description Series ETA25 Shaft diameter, shaft length: Shaft diameter Ø 6 mm, shaft length 22 mm Option: Shaft diameter Ø 6.35 mm, shaft length 22 mm Option: User defined shaft dimensions [mm] Ø ≤6.35mm Selection: standard=black/bold, possible options=grey/cursive ETA25 6x22 6.35x22 XxXX Supply voltage / Output signal: VSUP=5 V (4.5...5.5 V) / OUT=0...5 V (ratiometric) VSUP=24 V (15...30 V) / OUT=0...10 V VSUP=24 V (9...30 V) / OUT=4...20 mA VSUP=24 V (9...30 V) / OUT=0...5 V Sense...

Open the catalog to page 3

Data Sheet for Angle Sensors Series ETA25 Hall-Effect Single-Turn Rotary Encoder with Analog Output Order Code Description Series ETA25X (X=electric redundant) Selection: standard=black/bold, possible options=grey/cursive ETA25X Shaft diameter, shaft length: Shaft diameter Ø 6 mm, shaft length 22 mm Option: Shaft diameter Ø 6,35 mm, shaft length 22 mm Option: User defined shaft dimensions [mm] Supply voltage / Output signal: VSUP=5 V (4,5...5,5 V) / OUT=0...5 V (ratiometric) VSUP=24 V (15...30 V) / OUT=0...10 V Sense of rotation, output 1: Sense of rotation CW (output signal increases...

Open the catalog to page 4

Data Sheet for Angle Sensors Hall-Effect Single-Turn Rotary Encoder with Analog Output Additional options For higher quantities or on-going demand, additional options are available as described below on request max. Customized signal characteristic Signal level For example: Special shaft design Special cable and connection design Special torque For Example: minimum/maximum signal level signal plateaus 360° MEGATRON Elektronik GmbH & Co. KG ▪ Hermann-Oberth-Strasse 7 ▪ 85640 Putzbrunn / Munich Tel.: +49 89 46094-0 ▪ www.megatron.de ▪ info@megatron.de Specifications are subject to change...

Open the catalog to page 5

Data Sheet for Angle Sensors Series ETA25 Hall-Effect Single-Turn Rotary Encoder with Analog Output Drawing 1 View shows ETX25 without inner teeth washer and hex nut. Tightening torque of h Shipment with inner te Material Limitation according to 2011/65/ The copying, use, distribution or disdosure of the confidentional a strictly prohibited without prior written consent. Any breach shall s rights in the event of the grant of a patent or the registration of au Signal sequence Standard shaft dimensions Shaft length A 22 mm Mounting Surface MEGATRON Elektronik GmbH & Co.KG Hermann-Oberth-Str....

Open the catalog to page 6

Data Sheet for Angle Sensors Mounting Surface Connector Phoenix: Connector Phönix: MCV0,5-5-G2,5 MCV0,5-3-G2,5 FK-MC0,5-5-St2,5 FK-MC0,5-3-St2,5 Mounting Surface 17,8 ±1 Picture 2 (cable option F) Picture 1 (cable option R) Standard Cable Length L roughnessFof installation mm 150 surface 4 The copying, use, distribution or disdosure of the confidentional and proprietary informa strictly prohibited without prior written consent. Any breach shall subject the infringing p Material Limitation according to 2011/65/EU (RoHS) andrights in the event of the grant No.1907/2006 (REACH) or design....

Open the catalog to page 7

Data Sheet for Angle Sensors Series ETA25 Hall-Effect Single-Turn Rotary Encoder with Analog Output Cable- and Pin-assignment ETA25 Function: Cable and pin assignment ETA25X (redundant version) Function: MEGATRON Elektronik GmbH & Co. KG ▪ Hermann-Oberth-Strasse 7 ▪ 85640 Putzbrunn / Munich Tel.: +49 89 46094-0 ▪ www.megatron.de ▪ info@megatron.de Specifications are subject to change without notice Date: Page:

Open the catalog to page 8

Data sheet ETA25 8Pages

Catalog excerpts

All MEGATRON Elektronik GmbH & Co. KG catalogs and technical brochures

Data sheet ETA25
8Pages