Data Sheet for Precision Potentiometer Series AC Multiturn Wirewound Potentiometer On Request: Special machining on shaft The robust AC potentiometers in 20 mm housing are suitable for applications where a precise and economical multiturn potentiometer is important. Economical and precise multiturn sensor with numerous options Completely encapsulated housing with 2 x sleeve bearings With many options e.g. limit switch, slipping clutch The sintered bearing in the back cover gives the shaft improved stability. The completely encapsulated housing increases the robustness in addition. The potentiometer is available in 5 or 10 turn version. Electrical Data Effective electrical angle of rotation 1.) Total resistance 1.) Resistance tolerance Independent linearity (best straight line) 1.) Depends on resistance value (see table below) Rotational noise (ENR) 1.) (Method C) Max. / recommended wiper current 1.) Mechanical Data, Environmental Conditions, Miscellaneous Mechanical angle of rotation Lifetime (90% el. eff. angle half sine) 2.) Operational torque @ ambient temperature 1.) 2.) Operating temperature range Storage temperature range Protection option D shaft sealing (IEC 60529) Housing diameter Housing depth Shaft diameter Shaft type MEGATRON Elektronik GmbH & Co. KG ▪ Hermann-Oberth-Strasse 7 ▪ 85640 Putzbrunn / Munich Tel.: +49 89 46094-0 ▪ www.megatron.de ▪ [email protected] Specifications are subject to change without notice

Data Sheet for Precision Potentiometer Series AC Multiturn Wirewound Potentiometer On Request: Special machining on shaft Mechanical Data, Environmental Conditions, Miscellaneous Connection type Gold plated soldering lugs Connection position Sensor mounting Fastening parts included in delivery Fastening torque mounting nut Material shaft Stainless steel Material housing 1.) According IEC 60393 2.) Determined by climatic conditions according to IEC 68-1, para. 5.3.1 without load collectives Please note: Max. permissible supply voltage <75 VDC respectively <50 VAC in addition the max. power rating...

Data Sheet for Precision Potentiometer Series AC Multiturn Wirewound Potentiometer On Request: Special machining on shaft Order code Description Selection: standard=black/bold, possible options=grey/cursive Revolutions with stop: 5-turn 10-turn Resistance value / Option Tandem: Option 10 Ohm (only 5 Turn) Option 20 Ohm Option 50 Ohm Option 100 Ohm Option 200 Ohm Option 500 Ohm 1 kOhm Option 2 kOhm 5 kOhm 10 kOhm Option 20 kOhm Option 50 kOhm Option 100 kOhm Option 150 kOhm (only 10 Turn) Option rear shaft: Standard Ø2 x 10 mm Shaft length in mm Shaft diameter in mm (≤2 mm) Resistance tolerance:...

Data Sheet for Precision Potentiometer Series AC Multiturn Wirewound Potentiometer On Request: Special machining on shaft Drawing 20.6±1 Option: rear shaft extension multiganged Mounting Surface Option: limit switch Unless otherwise specified, the limit-switch is of inscription type on both ends. - Rating of limit-switch 1A, 125V.A.C. (resistance load) - Life expectancy of limit-switch: 50000 operations - Operating temperature range: -55 °C..+105 °C MEGATRON Elektronik GmbH & Co. KG ▪ Hermann-Oberth-Strasse 7 ▪ 85640 Putzbrunn / Munich Tel.: +49 89 46094-0 ▪ www.megatron.de ▪ [email protected]...

Data Sheet for Precision Potentiometer Series AC Multiturn Wirewound Potentiometer On Request: Special machining on shaft On Request: Special machining on shaft ±0.05 Counterbore hole Double side flat L Counterbore screw hole Screw Thread Screw thread inside hole M MEGATRON Elektronik GmbH & Co. KG ▪ Hermann-Oberth-Strasse 7 ▪ 85640 Putzbrunn / Munich Tel.: +49 89 46094-0 ▪ www.megatron.de ▪ [email protected] Specifications are subject to change without notice Date: Page: