Data Sheet for Joysticks Series 841 Very robust finger joystick with switching functions Single/double pole or progressive switching Switching up to 1 A (optional), 125 V max. Center detect switch (optional) Up to IP class 65 (above panel) High durability Large selection of different handles The 841 series switch joysticks are suitable for harsh environments and safety-critical applications. The switching functions are guaranteed by high quality microswitches. No matter if switching in single pole, double pole, or progressive mode - the robust mechanism guarantees a long lifetime even at intense usage. Moreover there is a large number of handle to choose from with or without pushbutton(s). Technical Data Lifetime Switch contacts Gold plated Protection grade Angle of Movement X-, Y-Axis Breakout Force Operating Temperature Range Wiring Colour Cable specification First Switch East First Switch North Second Switch East Second Switch North First Switch West First Switch South Second Switch West Second Switch South Microswitch:14/0,12 tinned annealed wire PVC insulated, nom. outer diameter 1 mm; length fo twisted cable harness ca. 150 mm. Center Detect First Pushbutton (Top of handle) Second Pushbutton (Side or top of handle) Third Pushbutton (Top of handle) Common (depends on configuration) MEGATRON Elektronik GmbH & Co. KG ▪ Hermann-Oberth-Strasse 7 ▪ 85640 Putzbrunn / Munich Tel.: +49 89 46094-0 ▪ www.megatron.de ▪ [email protected] Specifications are subject to change without notice Pushbuttons inside handle: 7/0,13 wires tinned copper wire ETFE insulated, nom. outer diameter 0,7 mm

Data Sheet for Joysticks Series 841 Please contact us for information regarding stock articles, delivery times and minimum order quantities. Order Code Description Series Selection: standard=black/bold, possible options=grey/italics 841 Axes: 1 axis 2 axes Rubber Boot: No bezel, below panel mounting Square bezel, drop-in mounting Circular bezel, below panel mounting Return Mechanism: Spring return Spring return with guided feel in X & Y Handles: Handle A, round Handle B, cylindrical Handle F, cylindrical, skirted Handle C, conical mid-size Handle H, with 1 pushbutton Handle G, with 2 pushbuttons...

Data Sheet for Joysticks Series 841 Switchstick Handles Sparked Matt Sparked Matt Sparked Matt Sparked Matt Sparked Matt Sparked Matt Dimensions in mm (inches) MEGATRON Elektronik GmbH & Co. KG ▪ Hermann-Oberth-Strasse 7 ▪ 85640 Putzbrunn / Munich Tel.: +49 89 46094-0 ▪ www.megatron.de ▪ [email protected] Specifications are subject to change without notice Date: Page:

Data Sheet for Joysticks Series 841 Switchstick Switch Configurations „1“ : One Axis, Single Pole „2“ : One Axis, Double Pole One switch will actuate as the joystick moves away from center in either direction. Two switches will actuate as the joystick moves away from center, in either direction. One switch will actuate after 50% of travel, with a further switch at the end of travel, in either direction. „5“ : Two Axes, Single Pole „6“ : Two Axes, Double Pole As per option „3“, but with a mechanical detent between actuation of the first and second switch. SW2 One switch will actuate in each of...

Data Sheet for Joysticks Switchstick Technical Drawing MEGATRON Elektronik GmbH & Co. KG ▪ Hermann-Oberth-Strasse 7 ▪ 85640 Putzbrunn / Munich Tel.: +49 89 46094-0 ▪ www.megatron.de ▪ [email protected] Specifications are subject to change without notice Date: Page:

Data Sheet for Joysticks Series 841 Switchstick Mounting Options Option „2“: Drop-in of Joystick into panel cut-out. For panel thickness < 3 mm, M3 x 16 countersunk machine screw are recommended. Also available with circular bezel. Option „1“: Mounting of Joystick from beneath the panel. No bezel needed. M3 machine screws recommended. Option „3“: Mounting of Joystick from beneath the panel. Base of boot must be brought through panel cut-out and held in place with the circular bezel. For panel thickness < 3 mm, M3 x 16 countersunk machine screw are recommended. Dimensions in mm (inches) MEGATRON...