Data sheet 46
5Pages

Catalog excerpts

Data Sheet for Precision Potentiometer Series 46 Multiturn Wirewound Potentiometer The potentiometers of the series 46 are used as multiturn sensors or manual adjusters with outstanding linearity and resolution for measuring ranges from 3 up to 30 turns. Multiturn 3..20 turns (25 and 30 turns on request) Optional limit switch (CW, CCW) Optional back shaft Power rating up to 10 W Optional tandem version The optionally integrable limit switches can be factory-configured within the electrically effective angle of rotation or within the signal plateau. 4605 Electrical Data Effective electrical angle of rotation 1.) Resistance tolerance Independent linearity (best straight line) 1.) Depends on resistance value (see table below) Rotational noise (ENR) 1.) (Method C) Max. / recommended wiper current 1.) Insulation Voltage 1.) Insulation Resistance 1.) Mechanical Data, Environmental Conditions, Miscellaneous Mechanical angle of rotation Lifetime (90% el. eff. angle half sine) 2.) Sleeve bearing Operational torque @ ambient temperature 1.) 2.) Operating temperature range Storage temperature range Protection option D shaft sealing (IEC 60529) Housing diameter Housing depth Shaft diameter Shaft type MEGATRON Elektronik GmbH & Co. KG ▪ Hermann-Oberth-Strasse 7 ▪ 85640 Putzbrunn / Munich Tel.: +49 89 46094-0 ▪ www.megatron.de ▪ info@megatron.de Specifications are subject to change without notice

Open the catalog to page 1

Data Sheet for Precision Potentiometer Series 46 Multiturn Wirewound Potentiometer Mechanical Data, Environmental Conditions, Miscellaneous Connection type Soldering lugs / pin (with option limit switch) Connection position Sensor mounting Fastening parts included in delivery Fastening torque mounting nut Material shaft Stainless steel Material housing Aluminium / plastic 1.) According IEC 60393 2.) Determined by climatic conditions according to IEC 68-1, para. 5.3.1 without load collectives Please note: Max. permissible supply voltage <75 VDC respectively <50 VAC in addition the max. power...

Open the catalog to page 2

Data Sheet for Precision Potentiometer Series 46 Multiturn Wirewound Potentiometer Order code Description Selection: standard=black/bold, possible options=grey/cursive Revolutions with stop: 3-turn 5-turn 10-turn 15-turn 20-turn Resistance value /Option Tandem: Option 10 Ohm (only 3-turn) Option 20 Ohm (only 3 + 5-turn) Option 50 Ohm Option 100 Ohm Option 200 Ohm Option 500 Ohm 1 kOhm Option 2 kOhm 5 kOhm 10 kOhm Option 20 kOhm Option 50 kOhm Option 100 kOhm Option 200 kOhm (only 10..20-turn) Option 500 kOhm (only 20-turn) Option rear shaft: Standard Ø6 x 28 mm Shaft length in mm Shaft...

Open the catalog to page 3

Data Sheet for Precision Potentiometer Series 46 Multiturn Wirewound Potentiometer Drawing L2±1 L1±1 Ø46±1 Option: Tandem rear shaft extension Version with limit switch Note: Please process the mounting hole on the panel. 0 The diameter should be 9.0 ＋ 0.05 mm Circumscription (standard) Inscription Type (option) Limit-Switch is activated outside effective electrical angel (360°x n). 360°×n Approx. 30° Limit-Switch is activated within effective electrical rotating angle (360°x n). Limit switch Limit switch MEGATRON Elektronik GmbH & Co. KG ▪ Hermann-Oberth-Strasse 7 ▪ 85640 Putzbrunn /...

Open the catalog to page 4

Data Sheet for Precision Potentiometer Series 46 Multiturn Wirewound Potentiometer On Request: Special machining on shaft ±0.05 Counterbore hole Double side flat L Counterbore screw hole Screw Thread Screw thread inside hole M MEGATRON Elektronik GmbH & Co. KG ▪ Hermann-Oberth-Strasse 7 ▪ 85640 Putzbrunn / Munich Tel.: +49 89 46094-0 ▪ www.megatron.de ▪ info@megatron.de Specifications are subject to change without notice Date: Page:

Open the catalog to page 5

Data sheet 46 5Pages

Catalog excerpts

All MEGATRON Elektronik GmbH & Co. KG catalogs and technical brochures

Data sheet 46
5Pages