Data Sheet for Joysticks Series 890 Hand Joystick Large heavy duty hand joystick of the highest quality with stock grip handle Detection by conductive plastic potentiometers or Hall sensors Handles available with button, rocker, or third axis (z rotation) IP65 Spring Return to Center or Friction Clutch Wide range of configuration options for switches, latching positions Haptics and behaviour of the x and y axis can be adjusted separately The large Hand Grip Joysticks of the 890 series with stock grip handle were specially developed for the multi-axis control of machines in tough, demanding environments, where the highest requirements on quality and feel must be met and where the sensors must be configurable. The joysticks are a guarantee for success in demanding applications with up to three axes. Technical Data Joystick Sensor Potentiometer or Hall Effect Expected Life Angle of Movement X-, Y-Axis Angle of Movement Z-Axis Return to Center Accuracy X/Y Operating Force X-, Y-Axis Operating Force Z-Axis Protection Class Operating Temperature Technical Data Potentiometer X- & Y-Axis Type F Conductive Plastic Conductive Plastic Sleeve Bearing Sleeve Bearing Resistance Tolerance Independent Linearity Tolerance Max. Current / Sensitivity VOut Electrical Rotating Angle Expected Life (cycles) Only when the joystick is configured with a housing, lead wires (AWG26, length approx. 300 mm) are supplied as standard. In versions without a housing, the sensors are directly accessible for connection to their terminals. If case of ongoing demand, we are happy to provide customized cabling for you. Note: Max. Voltage < 50 VAC resp. < 75 VDC, additionally max. power rating must be considered. MEGATRON Elektronik GmbH & Co. KG ▪ Hermann-Oberth-Strasse 7 ▪ 85640 Putzbrunn / Munich Tel.: +49 89 46094-0 ▪ Fax: +49 89 46094-201 ▪ www.megatron.de ▪ [email protected] Specifications are subject to change without n

Data Sheet for Joysticks Series 890 Hand Joystick Technical Data Hall Sensor Supply Voltage Current Consumption Output Voltage Independent Linearity Temperature Drift Output Temperature Drift Center Dielectric Strength Insulation Resistance Operating Temperature Expected Life Only when the joystick is configured with a housing, lead wires (AWG26, length approx. 300 mm) are supplied as standard. In versions without a housing, the sensors are directly accessible for connection to their terminals. If case of ongoing demand, we are happy to provide customized cabling for you. The lead wires are marked....

Data Sheet for Joysticks Series 890 Hand Joystick Please contact us for information regarding stock articles, delivery times and minimum order quantities. Order Code Series Axes / Functions: 1 Axis 1 Axis with Pushbutton 1 Axis with Rocker 2 Axes 2 Axes with Pushbutton 2 Axes with Rocker 3 Axes Sealing: Rubber Boot Return Mechanism: Spring Return to Center Position Without Spring Return Friction Clutch with Center Detect Switch Friction Clutch Handles Stock Grip, for 1 or 2 Axes Stock Grip, with Pushbutton, for 1 or 2 Axes Stock Grip, with Rocker, for 1 or 2 Axes Stock Grip incl. 3rd Axis No...

Data Sheet for Joysticks Series 890 Hand Joystick Mounting Cut-Out and Orientation of Limiters Panel Cut-Out Mounting (schematic) 4x M3 Rubber Boot Fixation Ring Fixation Position Rubber Gasket MEGATRON Elektronik GmbH & Co. KG ▪ Hermann-Oberth-Strasse 7 ▪ 85640 Putzbrunn / Munich Tel.: +49 89 46094-0 ▪ Fax: +49 89 46094-201 ▪ www.megatron.de ▪ [email protected] Specifications are subject to change without notice

Data Sheet for Joysticks Series 890 Hand Joystick Technische Zeichnung Drawing 50 Hall Sensor (not shown) Potentiometer Wires AWG26, Length ca. 300mm. mm Anschlusslitzen AWG26 ca. 300 Hall Sensors hiding under cover ring Potentiometer Potentiometer Y-Axis Y-Achse Potentiometer Potentiometer X-Axis X-Achse MEGATRON Elektronik GmbH & Co. KG ▪ Hermann-Oberth-Strasse 7 ▪ 85640 Putzbrunn / Munich Tel.: +49 89 46094-0 ▪ Fax: +49 89 46094-201 ▪ www.megatron.de ▪ [email protected] Specifications are subject to change without notice