Finger Joystick Series 847 ■ Dual redundant outputs ■ IP67 sealed ■ 2 lever heights: 48mm and 60mm ■ 5 lever colours Series 847 is offering paddle joysticks of high precision and quality - claims that are not only supported by sculpted grips with soft touch, but also by technical properties. Contactless Hall technology paired with a smooth and easy to operate mechanic are resulting in a long-lasting and reliably working joystick, specially suited for mild to extreme environments in mobile remote controls, cleaning machines, material handling and agricultural vehicles. Two different device geometries allow to choose the one optimally suiting the application needs. Technical Data Sensor Supply Voltage Vsupply Output Voltages Center Voltage Current Consumption Switch Output Loads Mechanical Operating Angle Max. load to mechanism Life Cycles Operating Temperature Storage Temperature Seal above Panel Damp Heat Salt Spray Conducted Emissions Radiated Emissions Radiated Immunity Conducted Immunity Signal Cable Transients AC Magnetic Field Immunity ESD Vibration Bump Freefall drop Shock Hall effect 5 V ±0,5 V transient free 0..5 V / 0,5..4,5 V (Dual Output), PWM optional Vsupply/2 ± 5% * full scale < 20mA Open Drain, internal Pull-Up 1,5kQ to Vsupply, smoothed to 0V with 100nF Minimum 10 kQ, >100kQ recommended 60° (±30° from center) Horizontal: 75N / Vertical: IK08 (BSEN62262:2002) 10 million cycles -25°C..+70°C -40°C..+85°C IP67 above panel (with gasket) - BS EN 60529:1992+A2:2013 BS EN 60068-2-78:2002, 21 days @ +85°C 85%RH BS EN 60068-2-11:1999, 48 hours @ +35°C with 5% NaCl CISPR 25:2008 Ed. 3.0 CISPR 25:2008 Ed. 3.0, EN61000-6-4:2011 ISO 11452-2: 2004 (150V/m), EN61000-6-2: 2005 ISO 11452-4:2011 EN 6100-6-2:2005 MIL-STD-461F ISO 10605: 2008 inc A1: 2014 (8kV contact / 15kV air discharge) EN61000-4-2 ISO15003 level 1 in 3 axes 10...350Hz, Level 2, 8 hours/axis BS EN 60068-2-27:2009 40g 6ms half sine, 50 shocks in each sense of each axis, total 300 shocks BS EN 60068-2-31:2008, 1000mm onto all faces and edges BS EN 60068-2-27:2009 50g 6ms half sine, 3 shocks in each sense of each axis, total 18 shocks MEGATRON Elektronik GmbH & Co. KG ■ Hermann-Oberth-Strasse 7 ■ 85640 Putzbrunn / Munich Date: 28.04.2021 Tel.: +49 89 46094-0 ■ Fax: +49 89 46094-201 ■ www.megatron.de ■ [email protected] Page: 1 von 5 Specifications are subject to change without noti

Finger Joystick Series 847 Order Code Description Selection: standard=black/bold, possible options=grey/italics Lever operation: Spring return to center = 0° Spring return to center with detent at 0° Spring return to center with detents at 0° & ±15° Spring return to center with detents at 0° & ±30° Spring return to center with detents at 0° & ±15° & ±30° Without spring return with detent at 0° Without spring return with detents at 0° & 15° Without spring return with detents at 0° & 30° Without spring return with detents at 0° & 15° & 30° Paddle inserts: Black Red Blue Yellow Green Output options:...

Data Sheet for Joysticks Series 847 Finger Joystick Information on „Output Options“ and „Switching Points“ The 847 series joystick is configured as two “electrical” controls in one mechanical package. The Paddle operates from 5 V and provides two proportional outputs. The second output is accurate to the first within +/-3% of the power supply. The power supply for the secondary output is also completely independent. Customers may choose their preference of voltage outputs. The secondary output can be of the same or inverse polarity to the primary wiper. For example, with a secondary inverse output,...

Data Sheet for Joysticks Series 847 Finger Joystick Technical Drawing “Paddle 1” 60mm height above panel Panel Cut-Out & Mounting “Paddle 1” The Joystick is fitted with M3 bushes in all six positions and may be mounted with two different hole patterns: - Two screws (shown in yellow) N - Four screws (shown in silver). Screws are not included. The appropriate length of the screws is dependent on panel thickness. MEGATRON Elektronik GmbH & Co. KG ▪ Hermann-Oberth-Strasse 7 ▪ 85640 Putzbrunn / Munich Tel.: +49 89 46094-0 ▪ Fax: +49 89 46094-201 ▪ www.megatron.de ▪ [email protected] Specifications...

Data Sheet for Joysticks Series 847 Finger Joystick Technical Drawing “Paddle 2” 48mm height above panel 8 WAY CONNECTOR 2.54mm PITCH (0.1 INCH PITCH) Panel Cut-Out & Mounting “Paddle2” The Joystick is fitted with M3 bushes in all six positions and may be mounted with two different hole patterns: - Two screws (shown in yellow) - Four screws (shown in silver). Screws are not included. The appropriate length of the screws is dependent on panel thickness. MEGATRON Elektronik GmbH & Co. KG ▪ Hermann-Oberth-Strasse 7 ▪ 85640 Putzbrunn / Munich Tel.: +49 89 46094-0 ▪ Fax: +49 89 46094-201 ▪ www.megatron.de...