Finger Joystick Series 812 ■ Very wide selection of knobs ■1-3 axes ■ Spring strength can be adjusted separately for both axes on request ■ Optional Hall effect sensors or potentiometers ■ Compact with low installation depth <26 mm ■ Large deflection of up to ± 28 ° around the central position ■ Ideal solution when low operating forces are required The 812 series is unique in its design. The sensors are attached to the outside of the housing, which enables flexible adaptation of the sensors: the customer can select from different types of potentiometers and Hall sensors. There is also a very large selection of knobs. Thus, the joystick 812 can be optimized particularly well for the application. It is no coincidence that the series is the best-selling for CCTV applications. Angle of Movement X-, Y-Axis 56° (±28° from center) Angle of Movement Z-Axis 90° (±45° from center) Return to Center Tolerance ±2% Break Out- / Operating / Max. Force X & Y 0.7 N / 1.3 N / 100 N Break Out- / Operating / Max. Torque Z 0.022 Nm / 0.04 - 0.05 Nm / 0.20 Nm Supply Voltage Vsupply Output Voltage at center Output Voltages Hall Sensor Independent Linearity Tolerance Power Consumption Resolution Mechanical Life Operating Temperature Storage Temperature 5 VDC ±10% Vsupply/2 ±5% 0 to 5 V / 0.5 to 4.5 V / 0.25 to 4.75 V ± 2% < 11 mA (2 axes) / < 17 mA (3 axes) Infinite 1 Million cycles -25°C to +70°C -40°C to +70°C MEGATRON Elektronik GmbH & Co. KG ■ Hermann-Oberth-Strasse 7 ■ 85640 Putzbrunn / Munich Tel.: +49 89 46094-0 ■ www.megatron.de ■ [email protected]

Finger Joystick Series 812 Technical Data Pushbuttons Wiring for Joysticks with Potentiometers Wires AWG28, length ca. 290 mm, for - Joysticks with three axes - Joysticks with Pushbuttons Potentiometers w/o wires Wiring for Joysticks with Hall Sensors MEGATRON Elektronik GmbH & Co. KG ■ Hermann-Oberth-Strasse 7 ■ 85640 Putzbrunn / Munich Date: 02.11.2021 Tel.: +49 89 46094-0 ■ www.megatron.de ■ [email protected] Page: 2 of 6 Specifications are subject to change without notice

Finger Joystick Series 812 Please contact us for information regarding stock articles, delivery times and minimum order quantities. Order Description / Options Description Series Axes 2 Axes 3 Axes 3 Axes with Pushbutton(s) 1 Axis 1 Axis with Pushbutton(s) 2 Axes and Pushbutton(s) Mounting Bezel Split Bezel (Front Mounting) Rubber Boot (Front Mounting) Square Bezel (Rear Mounting) Square Bezel Snap-On (Front Mounting) Spring Return Standard Spring Force (50% enforced) Spring Return 75% enforced Spring Spring Return 100% enforced Spring Friction Clutch (Potentiometer versions only) Handles Handle...

Data Sheet for Joysticks Series 812 Finger JoystickMounting Options / Covers Split Bezel, Option „1“ O- Insert the joystick with bezel from beneath the panel - Cover ring to be attached from above the panel (see scheme left) - Cutout diameter required for mounting: 39,70 mm - Mounting accessories included: Bezel, cover ring, 4 black screws 2-56x1/2in Rubber Boot, Option „5“ - Insert the joystick with bezel from beneath the panel - Cover ring to be attached from above the panel (see scheme left) - Cutout diameter required for mounting: 39,70 mm - Mounting accessories included: Bezel, cover ring,...

Data Sheet for Joysticks Series 812 Finger Joystick Handles MEGATRON Elektronik GmbH & Co. KG ▪ Hermann-Oberth-Strasse 7 ▪ 85640 Putzbrunn / Munich Tel.: +49 89 46094-0 ▪ www.megatron.de ▪ [email protected] Specifications ar

Data Sheet for Joysticks Series 812 Finger Joystick Handles Dimensions Version “Hall Sensors“ Version “Potentiometers“ MEGATRON Elektronik GmbH & Co. KG ▪ Hermann-Oberth-Strasse 7 ▪ 85640 Putzbrunn / Munich Tel.: +49 89 46094-0 ▪ www.megatron.de ▪ [email protected] Specifications are subject to change without notice