Data Sheet for Precision PotentiometerMultiturn Wirewound Potentiometer The potentiometers of the series 46HDS are used as multiturn sensors with outstanding linearity and resolution for measuring ranges from 3 to 20 turns. ■ Multiturn from 3 up to 20 turns ■ Optional limit switch (CW, CCW) ■ Optional back shaft ■ Power rating up to 10 W ■ Optional tandem version The optionally integrable limit switches can be factory-configured within the electrically effective angle of rotation or within the signal plateau. Electrical Data Effective electrical angle of rotation 1.) Total resistance 1.) Resistance tolerance Independent linearity (best straight line) 1.) Theoretical resolution 1.) Backlash (Hysteresis) 1.) Rotational noise (ENR) 1.) (Method C) Max. / recommended wiper current 1.) Power rating @ 70 °C (0 W @ 105 °C) Insulation Voltage 1.) Insulation Resistance 1.) Depends on resistance value (see table below) Mechanical Data, Environmental Conditions, Miscellaneous MEGATRON Elektronik GmbH & Co. KG ■ Hermann-Oberth-Strasse 7 ■ 85640 Putzbrunn / Munich Date: 02/14/2023 Tel.: +49 89 46094-0 ■ www.megatron.de ■ [email protected] Page: 1 of 5

Data Sheet for Precision PotentiometerMultiturn Wirewound Potentiometer Mechanical Data, Environmental Conditions, Miscellaneous 1.) According IEC 60393 2.) Determined by climatic conditions according to IEC 68-1, para. 5.3.1 without load collectives Please note: Max. permissible supply voltage <75 VDC respectively <50 VAC in addition the max. power rating must be observed Resolution in degree E.g. R5k 5-turn = 1800° / 4170 = 0.432° per winding resistive wire *marked potentiometers have a single-wire design. These potentiometers have an almost infinite resolution and are available on request...

Multiturn Wirewound Potentiometer Series 46HDS Order code Description Selection: standard=black/bold, possible options=grey/italic Revolutions with stop: 3-turn 5-turn 10-turn 15-turn 20-turn Resistance value /Option Tandem: Option 10 Ohm (only 3-turn) Option 20 Ohm (only 3 and 5-turn) Option 50 Ohm Option 100 Ohm Option 200 Ohm Option 500 Ohm 1 kOhm Option 2 kOhm 5 kOhm 10 kOhm Option 20 kOhm Option 50 kOhm Option 100 kOhm Option 200 kOhm (only 10..20-turn) Option 500 kOhm (only 20-turn) Option rear shaft: Standard 06 x 15 mm Shaft length in mm Shaft diameter in mm (<6.35 mm) Resistance tolerance:...

Data Sheet for Precision PotentiometerMultiturn Wirewound PotentiometerDrawing Version with limit switch Circumscription (standard) Limit-Switch is activated outside effective electrical angel (360°x n). Inscription Type (option) Limit-Switch is activated within effective electrical rotating angle (360°x n). i 3600 X n I Limit switch Limit switch MEGATRON Elektronik GmbH & Co. KG ■ Hermann-Oberth-Strasse 7 ■ 85640 Putzbrunn / Munich Date: 02/14/2023 Tel.: +49 89 46094-0 ■ www.megatron.de ■ [email protected] Page: 4 of 5 Specifications are subject to change without notice

Data Sheet for Precision PotentiometerMultiturn Wirewound PotentiometerOn Request: Special machining on shaft Slot Counterbore hole Counterbore screw hole Screw Thread Screw thread inside hole MEGATRON Elektronik GmbH & Co. KG ■ Hermann-Oberth-Strasse 7 ■ 85640 Putzbrunn / Munich Date: 02/14/2023 Tel.: +49 89 46094-0 ■ www.megatron.de ■ [email protected] Page: 5 of 5 Specifications are subject to change without notice