Multiturn Wirewound Potentiometer Series 46 4620 The potentiometers of the series 46 are used as multiturn sensors or manual adjusters with outstanding linearity and resolution for measuring ranges from 3 up to 30 turns. ■ Multiturn 3..20 turns (25 and 30 turns on request) ■ Optional limit switch (CW, CCW) ■ Optional back shaft ■ Power rating up to 10 W ■ Optional tandem version The optionally integrable limit switches can be factory-configured within the electrically effective angle of rotation or within the signal plateau. Electrical Data Effective electrical angle of rotation 1.) Total resistance 1.) Resistance tolerance Independent linearity (best straight line) 1.) Theoretical resolution 1.) Backlash (Hysteresis) 1.) Rotational noise (ENR) 1.) (Method C) Max. / recommended wiper current 1.) Power rating @ 70°C (0W @ 105°C) Insulation Voltage 1.) Insulation Resistance 1.) Depends on resistance value (see table below) Mechanical Data, Environmental Condi- 3 turn tions, Miscellaneous - MEGATRON Elektronik GmbH & Co. KG ■ Hermann-Oberth-Strasse 7 ■ 85640 Putzbrunn / Munich Date: 05/22/2020 Tel.: +49 89 46094-0 ■ Fax: +49 89 46094-201 ■ www.megatron.de ■ [email protected] Page: 1 of 5

Data Sheet for Precision Potentiometer Multiturn Wirewound Potentiometer 1.) According IEC 60393 2.) Determined by climatic conditions according to IEC 68-1, para. 5.3.1 without load collectives Please note: Max. permissible supply voltage <75 VDC respectively <50 VAC in addition the max. power rating must be observed Resistance value Ohm Number of wire turns (46-03) Number of wire turns (46-05) Number of wire turns (46-10) Number of wire turns (46-15) Number of wire turns (46-20) Resistance value Ohm Number of wire turns (46-03) Number of wire turns (46-05) Number of wire turns (46-10) Number...

Data Sheet for Precision PotentiometerMultiturn Wirewound PotentiometerOrder code Description Selection: standard=black/bold, possible options=grey/cursive 46 Resistance value /Option Tandem: Option 10 Ohm (only 3-turn) Option 20 Ohm (only 3 + 5-turn) Option 50 Ohm Option 100 Ohm Option 200 Ohm Option 500 Ohm 1 kOhm Option 2 kOhm 5 kOhm 10 kOhm Option 20 kOhm Option 50 kOhm Option 100 kOhm Option 200 kOhm (only 10..20-turn) Option 500 kOhm (only 20-turn) Option rear shaft: Standard 06 x 28 mm Shaft length in mm Shaft diameter in mm (<6,35 mm) Resistance tolerance: ±5% Option ±1% Front shaft:...

Data Sheet for Precision PotentiometerMultiturn Wirewound PotentiometerDrawing Version with limit switch 046±i Note: Please process the mounting hole on the panel. The diameter should be 9.0+ 0.05 mm Circumscription (standard) Limit-Switch is activated outside effective electrical angel (360°x n). Inscription Type (option) Limit-Switch is activated within effective electrical rotating angle (360°x n). 1 3600 X n 1 Limit switch Limit switch Limit switch MEGATRON Elektronik GmbH & Co. KG ■ Hermann-Oberth-Strasse 7 ■ 85640 Putzbrunn / Munich Date: 05/22/2020 Tel.: +49 89 46094-0 ■ Fax: +49 89 46094-201...

Data Sheet for Precision PotentiometerMultiturn Wirewound PotentiometerOn Request: Special machining on shaft Slot Double side flat Counterbore hole Counterbore screw hole Screw Thread Screw thread inside hole MEGATRON Elektronik GmbH & Co. KG ■ Hermann-Oberth-Strasse 7 ■ 85640 Putzbrunn / Munich Date: 05/22/2020 Tel.: +49 89 46094-0 ■ Fax: +49 89 46094-201 ■ www.megatron.de ■ [email protected] Page: 5 of 5 Specifications are subject to change without notice