Energy: natural gas & oil field industry brochure
12Pages

ENERGY: NATURAL GAS & OIL FIELD EN INDUSTRY BROCHURE

ENERGY: NATURAL GAS & OIL FIELD We offer products and accessory items supporting the oil and gas industry in applications from drilling and extraction to transport and delivery. Our belts ensure efficient and reliable operations, including power transmission and moving products. In this brochure, you will find the overview of the key processes and auxiliary equipment from land-based to offshore oil exploration where our belting solutions prove their worth. Megadyne has been catering to your needs since 1957, designing and manufacturing power transmission belts, matched components, and...

MEGADYNE V-BELTS - PLURIBAND SUPPLIED AS According to the number of V-belts TENSION MEMBER Oil and heat-resistant, static dissipating METAL DRIVE COMPONENTS Use an extensive range of pulleys and accessories like timing bars, flanges, clamping plates, couplings to design a complete drive transmission system. CERTIFICATIONS All Megadyne polyurethane power transmission belts comply with ISO 14001, ISO 9001 and European RoHS Directive. The belts are made with raw materials in compliance with REACH standards, meaning that all belts, pulleys, toothed bars, couplings blocking units and other items...

DRILLING: MUD PUMPS Mud pumps (drilling fluid pumps) deliver fluids under high-pressure underground to remove the rock cuttings from the bottom of the drill bit/hole as the drill continues its downward pursuit to the oil reservoir. Other fluids delivered from the pump are used to mitigate residue from the drill bit and also help the bit to stay cool. This fluid is then pumped back to the surface where the liquid and rock pieces are then sent through a shale shaker. Mud pumps must handle high-horsepower and use large belts. Banded version of V-belts for high loads applications (R8V). •...

DRILLING: SHALE SHAKER As drilling fluids and contaminants are pumped back out of the drilling area, material is passed through a shaker. The shaker is made up of several screens that separate rock fragments from the water/mud. Banded version of V-belts for high loads applications (R8V). • Oil-resistant • Antistatic Wrapped V-belts, made of polybutadiene compound in a wide variety of sizes and sections (B, C, D, 3V, 5V, 8V). • Oil and heat-resistant • Long and reliable service-life • Reduced operational cost

DRILLING: SHEAR PUMPS Shear pumps are belt-driven units used to mix various fluids into the mud that is fed back into the drilling pipe in order to improve drilling efficiency. LINEA GOLD Wrapped V-belts, made of polybutadiene compound in a wide variety of sizes and sections (B, C, D, 3V, 5V, 8V). • Oil and heat-resistant • Long and reliable service-life • Reduced operational cost The new generation of raw edge V-belts with narrow cross-section and raw edge construction, based on a new EPDM rubber compound (BX, CX sections). • Resistant to chemically aggressive environments, ageing, ozone,...

EXTRACTION: WELLHEAD COMPRESSOR Wellhead compressors are used to relieve pressure in order to create an efficient flow of oil to the surface and to the holding tank. Wellhead compressors are mainly used when the oil production is beginning to end and where oil still remains in the reservoir. In addition to helping improve the oil flow to the surface, wellhead compressors also extend the life of the well. Wellhead compressors are also used when moving the oil from the holding tank to the oilfield pipeline and onto refining. LINEA GOLD Wrapped V-belts, made of polybutadiene compound in a wide...

EXTRACTION: PUMPJACK Once oil has been reached, the drilling rig is removed and replaced with a pumpjack. These units are used to mechanically lift fluid out of the well where not enough bottom hole pressure exists for the liquid to reach the surface. LINEA GOLD Wrapped V-belts, made of polybutadiene compound in a wide variety of sizes and sections (B, C, D, 3V, 5V, 8V). • Oil and heat-resistant • Long and reliable service-life • Reduced operational cost The new generation of raw edge V-belts with narrow cross-section and raw edge construction, based on a new EPDM rubber compound (BX, CX...

EXTRACTION: OFFSHORE PLUNGER PUMPS In the case of oil platform exploration, salt water accompanies the oil to the surface. After separation from the oil, the saltwater is then pumped back into the oil reservoir using a plunger pump. This step helps in the continuing effort to build constant flow of the oil to the surface. LINEA GOLD Wrapped V-belts, made of polybutadiene compound in a wide variety of sizes and sections (B, C, D, 3V, 5V, 8V). • Oil and heat-resistant • Long and reliable service-life • Reduced operational cost The new generation of raw edge V-belts with narrow cross-section...

REFINING: AIR-COOLED HEAT EXCHANGER Air Cooled Heat Exchangers (ACHE) are used in refineries or any application where hot liquids or gasses are being processed. It is a type of heat exchanger that forces air over a set of coils to cool the process. Generally used where a process system generates heat which must be removed. They are also known as a Fin-Fan ®. 1 MEGADYNE MEGASYNC TM SILVER3 Rubber endless timing belts with spiral fiberglass cords and RPP profile (SLV3 8M, SLV3 14M). • High-speed capacity • High-precision drives • Antistatic 1 MEGADYNE MEGASYNC TM GOLD2 Rubber endless timing...

STIMULATION FRACTURING PUMP Stimulation fluid, which is a mixture of over 90% water and sand, plus a few chemical additives, is pumped under controlled conditions into deep, underground reservoir formations. The chemicals are used for lubrication, to keep bacteria from forming, to carry the sand, are typically non-hazardous and range in concentrations from 0.1% to 0.5% by volume. They are needed to help improve the performance and efficiency of the hydraulic fracturing. This process creates fractures in the shale rock which contains the oil and natural gas and aids in the extraction...