System On Module • Processor: Freescale i.MX287, 454 MHz based on ARM926EJ-S • RAM: 128MB DDR2-400 SDRAM • ROM: 128MB NAND Flash • Power supply Single 4.5V to 5.5V • Size 33mm SO-DIMM format • Temp.-Range 0°C..70°C Two 10/100Mbps Ethernet ports with IEEE1588 support Two High-Speed USB 2.0 ports True colour LCD controller max resolution 800 x 480 pixels Two CAN interfaces 4/5 wire Touchscreen interface Several peripheral interfaces: o UART, SD-CARD, I2C, PWM, Serial Audio, SPI Power management optimized for long battery life 3.3V I/O MECT srl – via Fermi 57/59 10091 Alpignano (TO) Italy

Development tools • • QT Creator Open source Soft PLC based on IEC 61131-3 languages Industrial Human Machine Interface Operator panel PLC Handheld instruments Component for automation system Internet Of Things MECT srl – via Fermi 57/59 10091 Alpignano (TO) Italy

Board highlights: MPX28 is a complete computer on a board smaller than a credit card. The module includes a Freescale® i.MX28x a SDRAM, a Flash memory and up to two Ethernet PHY interfaces. The integrated LCD-controller enables direct connection of an LCD screen with touch screen capability. On the MPX28 200pin SO-DIMM connector, are available a few interfaces as: • 2 x CAN • 1 x USB ITG • 1 X USB HOST • 2 x Ethernet interfaces • 3 x UART • 2 x I2C bus • 2 x Serial audio • 1 x four wires SD card MECT srl – via Fermi 57/59 10091 Alpignano (TO) Italy

System on module Additional interfaces like CAN, 4/5-wire resistive touch-screen, 3 UARTs and external memory interface are available on MPX28 specific pins. Some interfaces are multiplexed with other functions. • • • • • Freescale® i.MX28, 454 MHz 128 MByte DDR2-400 SDRAM (16bit) 128 MByte NAND Flash memory DIMM200-module (67,6mm x 26 mm x 3,6mm) Operating temperature range 0..70°C Power Supply The MPX28 accepts an input voltage from various sources: • • 1-cell Li-Ion/Polymer (3.1V to 4.2V) 5.0V USB supply or AC wall adapter Pinout PINOUT PIN POWER SUPPLY 1-4 5-8 9-12 13 Power Power Power Power...

Only on iMX287 Only on iMX287 Only on iMX287 Only on iMX287 Only on iMX287 Only on iMX287 Signal to enable power on LAN modules MECT srl – via Fermi 57/59 10091 Alpignano (TO) Italy Configure as Host or device

MECT srl – via Fermi 57/59 10091 Alpignano (TO) Italy CA098_01 12/12

LCD data bus LCD data bus LCD data bus LCD data bus LCD data bus LCD data bus LCD data bus LCD data bus LCD data bus LCD data bus LCD data bus LCD data bus LCD data bus LCD data bus LCD data bus LCD data bus LCD data bus LCD data bus LCD data bus LCD data bus LCD data bus LCD data bus LCD data bus LCD data bus LCD enable signal LCD pixel clock LCD horizzontal sync GPIO1_28 LCD vertical sync GPIO1_24 GPIO1_25 GPIO3_30 LCD reset GPIO1_26 GPIO1_27 Touch-screen Touch-screen Touch-screen Touch-screen MECT srl – via Fermi 57/59 10091 Alpignano (TO) Italy

DUART_TX DUART_RX JTAG_TDO JTAG_TRST JTAG_TMS JTAG_RTCK JTAG_TCK JTAG_TDI BM0 BM2 BM3 RESETn SPDIF MECT srl – via Fermi 57/59 10091 Alpignano (TO) Italy GPIO3_17 Debug uart GPIO3_16 Debug uart