Shotcrete Penetrometer Sales brochure

Shotcrete penetrometer Shotcrete, also known as sprayed concrete, is placed through spraying at high speed and is compacted upon impact with almost immediate hardening. It is widely used in the construction industry, especially for underground tunneling and mining, where wet shotcrete is employed as the primary lining method. To determine the bond strength of shotcrete during early curing, it's crucial to monitor its consistency to ensure proper strength values are achieved. These allow decisions to be taken by inspectors about the suitability of the mix and determine when tunneling progress...

Shotcrete accelerators can fast-track the setting time without significantly reducing early strength. The selection of the right accelerator and dosage is based on the desired setting time and may be affected by factors such as cement content, water-to-cement ratio, mix temperature, and application temperature. To ensure the shotcrete meets the required standards, it is important to test its in-situ performance. Early-age strength is determined by measuring the compressive strength of shotcrete after about an hour and is a common method to evaluate performance. Testing also determines the earliest...

Shotcrete penetrometer This model features a touchscreen display that provides readings in N and converts them into MPa according to the size of aggregate being tested (as per EN 14488-2). The results are displayed in a table for easy review. This model comes with a membrane keypad and LCD display that displays readings in N or daN. The readings can be converted into MPa by referencing a calibration curve, or they can be stored in memory and later exported to a PC for conversion as per EN 14488-2. Shotcrete penetrometer Touchscreen shotcrete penetrometer Statistics Use onboard statistics for...

Order your shotcrete penetrometer online: mecmesin.com Mecmesin reserves the right to alter equipment specifications without prior notice. E&OE.