OmniTest Universal Testing Machines
15Pages

OmniTest Universal Testing Machines Sales brochure

Ensure product quality Mecmesin has developed the OmniTest with VectorPro® software to perform strength tests on a variety of materials and finished products. A range of rigid test frames enables the physical properties of metals, plastics, composites, wood, fabrics, glass and ceramics to be accurately characterised in tension and compression up to 50 kN.

Choosing a universal tester Your step-by-step guide to testing Tensile and compression testing is an important part of design and quality control for ensuring product safety and performance. It is also an essential part of the testing regime that helps deliver cost-effective consistency and efficiency in manufacturing and assembly. Whether for incoming Quality Assurance, Research & Development or Quality Control in production, you can select the most appropriate Universal Testing Machine for your testing requirements by following these six simple steps. Define your testing requirements...

OmniTest Universal testing machines To suit your materials and product testing requirements the OmniTest range comes in two designs. Single-column testers are available in capacities of 0.5 kN to 7 kN .5 and twin-column testers cover between 10 kN to 50 kN. All OmniTests are supplied as standard with VectorPro testing software for installation on your computer, laptop or tablet. Alternatively, when ordering an OmniTest Touch, the tester is delivered with a pre-configured touchscreen console for an integrated solution.   mniTest can be fitted with different fixtures and fittings  O to suit...

OmniTest 0.5 For applications up to 500 N. An extended column height of 1616 mm (64"), makes it best suited to elongation testing of highly elastic materials such as rubber and film. Single-column UTM Intuitive controls make the OmniTest easy to use even for novice operators. These 3 single-column models feature a precision ballscrew driving a crosshead upon which an ELS loadcell is mounted. Their small footprint makes them ideal for bench-top use where space is limited and forces are below 2.5 kN. All models are suited for general purpose testing of specimens to determine their tension,...

5/7.5 kN Single-column UTM Enhanced rigidity and strength with intuitive controls make the OmniTest an excellent choice for testing mid-capacity stiff specimens below 7 kN. .5 These 2 single-column models feature a precision ballscrew with linear slide mechanism driving a solid crosshead fitted with an ELS loadcell. Both models are suited for general purpose testing of specimens to determine their tension, compression, flexure, shear and fracture. OmniTest Part For applications up to 7 kN. .5 An extended column height and increased throat depth make it suited to testing mid-sized stiff...

10/25/50 kN Twin-column testing machines As a versatile and easy-to-use universal testing machine, the dual-column OmniTests provide excellent rigidity with ample space between the columns. Ideal for testing high-capacity and larger-sized specimens up to 50 kN. These 3 models feature twin precision ballscrews to drive a solid crosshead fitted with an ELS loadcell. All models are suited for general testing of specimens to determine their tension, compression, flexure, shear and fracture. OmniTest Part OmniTest Touch Touchscreen test software

Loadcells Enhanced Load Sensors (ELS) A range of ELS loadcells are provided to ensure that you can test with optimum precision across the full capacity of your OmniTest universal tester. By selecting several ELS loadcells you can accurately test even the lowest of forces on a test frame rated to a much higher load. Each loadcell is automatically detected by the OmniTest without the need for user configuration. They all read from zero to their full nominal capacity and are accurate to ±0.5% of reading from 2 - 100% of range. Class 0.5 according to ISO7500-1 The ELS-P comprises a mounting box...

Universal testing machines Universal testing machines The OmniiTest test frames use as standard an internal displacement encoder to measure crosshead movement. For measuring tensile strain more accurately an extensometer can be connected directly to the test specimen to enable the precise calculation of material properties. Health and safety is extremely important when using machinery with moving parts and universal testers are no exception. All OmniTest testers can be supplied with a standard safety guard. This includes a rigid metal frame with integrated polycarbonate panels to allow the...

Accessories Grips and fixtures An extensive range of tensile grips, compression jigs and test accessories are available for use with all models of the OmniTest. For ease-of-use grips can be connected to the test stand and loadcell via threaded or quick-change adaptors. Discover your next Mecmesin grips and fixture solution online - visit mecmesin.com/accessories

Software core functionality VectorPro® is dedicated software for use with the OmniTest range of universal testing machines. It enables and stores test routines, acquires data from load sensors and displacement encoders then performs calculations on the data before generating test results for export and reporting. By connecting the OmniTest to your own PC (or the touchscreen controller of the OmniTest Touch) you can take advantage of running in a VectorPro® environment to create a more sophisticated test system. Your configuration is automatically detected and the software guides you through...

Your step-by-step guide to getting started By connecting the OmniTest to your own PC (or the touchscreen controller of the OmniTest Touch) you can unlock the power of VectorPro® to create a trully exceptional testing system to meet all your materials and product testing requirements. Touchscreen test software

Control Take control of your testing requirements The OmniTest Touch features a touchscreen controller which has been designed as an alternative to a desktop or laptop PC. It provides full PC capability, operating with Microsoft Windows® Windows, specifically optimised for and pre-installed with Mecmesin’s VectorPro™ software making it ready for immediate use with the OmniTest. For complete flexibility it is attached directly to the side of the test stand column and can be tilted or rotated for optimum ease of viewing. OmniTest manual settings and controls Designed specifically for...