S40
S40
Specifications:
- Frame Size: Maximum 550 x 470 mm with rapid tensioning frame (4-fold). Other frame types may be accepted.
- PCB Size: Maximum 400 x 375 mm.
- Printing Area: Maximum 350 x 340 mm.
Vision System:
- Equipped with 2 integrated CCD cameras and an LCD monitor for enhanced precision.
Squeegee Drive:
- Electric drive control with a print speed range of 5-150 mm/s.
- Freely programmable squeegee travel.
- Automatic reversible dual squeegee with universal holders for metal or rubber blades.
- Adjustable squeegee inclination (0 - 60°) and contact pressure (0 - 200 N).
Printing Capabilities:
- Supports single or double-sided boards.
- Automatic table lowering with adjustable speed (0.2 - 4 mm/s) and contact pressure (0 - 450 N).
- Table adjustment in X, Y, and Theta directions (+/- 12 mm / +/- 2.7°) with high accuracy (+/- 0.01 mm).
- Off-Contact (Z-Axis) Range: 0 - 24 mm.
Supply Requirements:
- Compressed air at 8 bar.
Dimensions and Weight:
- 860 x 650 x 380 mm, approximately 86 kg.
Application Area:
- Suitable for low to middle volume production.
- Capable of screen or stencil printing of glue, solder paste, or other substances.
- Qualified for fine pitch components with a minimum pitch of pads at 0.3 mm.
Catalog excerpts
Stencil printer S40 • stencil printer with vision • Technical data • • • • Frame size max. 550 x 470 mm Rapid tensioning frame – 4 fold another types of frames may be accepted • • PCB size max. 400 x 375mm • • Printing area max. 350 x 340 mm • • • Visionsystem Integrated 2 CCD cameras LCD monitor • • • Visionsystem 2 integrated kameras LCD monitor • • • • Squeegee drive electric drive control print speed 5-150mm/s freely programmable squeegee travel • • • • • Squeegee changeover Automatic reversible dual squeegee Universal holders for metal or rubber blade adjustable squeegee inclination 0 - 60 ° adjustable squeegee contact pressure 0 - 200 N • • Printing Single or double-sided boards • • • • Table lowering automatic table lowering / Z=10 mm lowering speed adjustable 0,2 - 4 mm/s adjustable table contact pressure 0 - 450 N • • Table - X, Y / Theta adjustment +/- 12 mm / +/- 2,7° • • Off-Contact (Z-Axis) Range 0 -24 mm • • Table - adjustment accuracy +/- 0,01 mm • • Supply Compressed air 8 bar • • Dimensions and wight 860 x 650 x 380 mm / ca. 86 kg • • Application area low or middle volume production screen- or stencilprinting of glue, solder paste or another substances qualified for fine pitch components minimum pitch of pads 0,3mm ● ● • Subject to technical alteration
Open the catalog to page 1All Mechatronic Systems catalogs and technical brochures
Reflow oven R2601 Page
Reflow ovens1 Page
Reflow oven RK3201 Page
Stencil printer S301 Page
P401 Page
P301 Page
P201 Page
S701 Page
S601 Page
S501 Page
RK360 reflow oven1 Page
D1 manual dispenser1 Page
M1 SMD manipulator1 Page
stencil printers S201 Page
stencil printers S101 Page
stencil printers S11 Page
- Volumetric dosing unit
- Liquids dispensing system
- Screen printing machine
- Automatic screen printing machine
- Soldering machine
- Flat bed screen printing machine
- Weight dispensing system
- Pick-and-place machine
- Reflow soldering machine
- Automatic soldering machine
- Manual dosing unit
- SMT pick-and-place machine
- Electronic screen printing machine
- Automatic pick-and-place machine
- PCB stencil printer
- Solder paste screen printing machine
- Programmable stencil printer
- Vacuum dosing unit
- Electronic component soldering machine
- Compact soldering machine