Impedance standards Resistance and Capacitance Four package types for various applications Custom nominal values and terminals upon request Low time constant MTE series resistance and capacitance standards are designed for calibration of ohmmeters, LCR meters and insulation testers. Alternatively, MTE standards can be used as transfer standards, keeping traceability between primary and secondary laboratories. MTE standards come in four terminal configurations to fit every application. OPEN and SHORT standards for zero calibration of LCR meters as well as custom nominals and terminal configurations are available upon request. Package types Package type megohmmeters, insulation testers 3x banana socket with extra insulation (2W measurement + case ground) ohmmeters, multimeters LCR bridges – wired connection LCR bridges – direct connection Zelezna 3 | 619 00 Brno | Czech Republic | 420 543 250 886 | [email protected] | www.meatest.com

SPECIFICATION Specifications below describe 1-year absolute accuracy of this product including long-term stability, linearity and reference standard measurement uncertainty as well as ambient conditions within specified limits. Reference temperature up to 1 MΩ: Foil resistor above 1 MΩ: Ceramic resistor Frequency range Available packages Operating temperature GENERAL DATA up to 1 MΩ: A, B and C above 1 MΩ: HV; DC applications only Reference voltage Voltage coefficient MTE RP Resistance Standards Max. deviation Temperature coefficient Nominal value Maximum dissipation power at 23 °C or maximum...