AC/DC Real-Resistance Loads M192A is accurate high power resistance decade for testing of power supplies and batteries up to 3000 W and 250 Vrms. Being a resistance decade rather than an electronic load, resistance function uses real resistance so it can be used with AC power sources as well. See datasheet for typical frequency responses. On top of that, M192A version has built-in test signal meter using which constant power and constant current functions can be simulated. Other advantages of the M192A are extended range up to 300 kΩ and continuous resistance range rather than fixed values. Resistance range 15 Ω – 300 kΩ Maximum load 3 kW, 250 Vrms Temperature coefficient < 10 ppm/K Real CR mode, simulated CP and CC modes RS232 and GPIB interface All decades' functions can be remotely controlled via RS232 or GPIB interface. This way you can introduce calibration/test stage directly into production line of any resistance based sensor and reduce time required for final quality tests dramatically. Zelezna 3 | 619 00 Brno | Czech Republic | 420 543 250 886 | [email protected] | www.meates

SPECIFICATION Specifications below describe 1-year absolute accuracy, including long-term stability, linearity, load and line regulation and reference standard measurement uncertainty as well as ambient conditions within specified limits. Resistance range summary M192: 15 Ω – 4.7 kΩ, 64 discrete values M192A: 15 Ω – 300 kΩ, continuous range Maximum dissipation power Maximum voltage Reaction time in CP and CC modes (M192A only) Ranges, resolution, 1 year accuracy [% of value] Range Test voltage measurement DC/AC voltage range Frequency range Measurement accuracy Typical frequency response of M192A...