Multifunction Calibrator AC/DC voltage/current up to 1050 V/20.5 A Basic uncertainty 35 ppm AC/DC power, energy, resistance, capacitance, frequency, TC, RTD Scope option up to 400 MHz High voltage resistance option for 1.5 kV insulation testers Built-in process multimeter Interface RS232, LAN, USB, GPIB Multifunction calibrator 9010 is designed as universal calibration tool for electrical calibration laboratories, covering most of their workload like multimeters clamp meters, ohm meters, power meters and power analyzers, energy meters, transducers, insulation testers, process meters, scopes and many others. High load capacity of both voltage (up to 50 mA) and current output allows for calibration of high-consumption analogue meters. Installed harmonic and non -harmonic shape signals allow for testing meter sensitivity to distorted signals by a signal with various crest factor. Advancing from previous M14x calibrator series, 9010 can now calibrate even 400 MHz scopes, 1.5 kV insulation testers and 287 kW power meters. On the other hand we kept all the popular functions including complete transducer and external sensor calibration (strain gauge, pressure, torsion, strength, etc.) using built-in multimeter, automatic uncertainty calculation, remote control and easy recalibration. 9010 calibrator is fully compatible with Meatest calibration SW package CALIBER/WinQbase which allows for time saving automated calibrations using any of the four installed remote control interfaces. Zelezna 3 | 619 00 Brno | Czech Republic | 420 543 250 886 | [email protected] | www.meatest.com

SPECIFICATION Specifications below describe 1-year absolute uncertainty at a confidence interval of 95%, including long-term stability, linearity, load and line regulation and reference standard measurement uncertainty as well as ambient conditions within specified limits. Warm-up time Reference temperature Operating temperature GENERAL DATA Storage temperature 10 % of accuracy / °C outside Tref Power supply Voltage range summary DC: 0 mV – 1050 V AC sine: 1 mVrms – 1050 Vrms Non-sine: 1 mVrms – 200 Vrms Internal ranges DC/AC Voltage Temperature coefficient Frequency accuracy and resolution Non-sine...

DC/AC Current Current range summary DC: 0.0000 µA – 20.50000 A AC Sine: 10.0000 µArms – 20.50000 Arms Non-sine: 100.0000 µArms – 2.000000 Arms Internal ranges Frequency accuracy and resolution Non-sine waveform types saw, triangle, square, truncated sin; 1kHz max. Non-sine amplitude uncertainty Ranges, resolution, 1 year uncertainty [% of value] Range Distortion and Load Characteristics Parameter THD in bandwidth up to 100 kHz Additional uncertainty for compliance voltage above 0.5 Vrms Voltage from current Voltage range Amplitude uncertainty Current coil (option 140-50) Source impedance Applicable...

Resistance range summary 2W and 4W continuous range 2W and 4W fixed decadic standards 100 GΩ High Voltage Resistance (optional) Basic resistance modes and 1 year uncertainty [ppm of value + absolute] Continuous range mode Nominal standard value Capacitance range summary 2W continuous range 2W fixed decadic standards Capacitance modes, 1 year uncertainty and frequency limits Continuous range mode Nominal standard value Thermocouple types TC cold junction compensation Manual or automatic with adapter 91

AC/DC Power & Energy Range summary power: voltage: current: frequency: time period: Total uncertainty based on voltage, current, phase shift and energy period specifications. Phase shift uncertainty Energy period uncertainty Additional features Harmonic distortion, voltage from current, current coil multiplication Total 1 year uncertainty overview [% of value] Current range Harmonic distortion (all AC functions) Fundamental harmonic uncertainty amplitude: frequency: phase shift: Frequency range Harmonic product amplitude range Harmonic product phase shift unc. Frequency / Scope option HF mode...

High Voltage Resistance option Maximum test voltage Resistance uncertainty Test voltage uncertainty Multimeter option Measurement function Using 9000-60 4W measurement adapter (comes as standard with MER option) Zelezna 3 | 619 00 Brno | Czech Republic | 420 543 250