ECONseries
10Pages

Low Cost USB Data Acquisition Modules Overview The ECONseries is a flexible yet economical series of multifunction DAQ modules. You choose the number of analog I/O and digital I/O channels, the resolution you need, and the signal range of your application. Key Features • Ultimate flexibility with up to 24 analog inputs, The ECONseries provides economical, multifunction data acquisition instruments for the USB bus. Simply install the software, connect your module to any USB port, and measure. 2 analog outputs, 28 digital I/O, and one 32-bit counter timer • 10-, 12-, or 16-bit resolution • Independent subsystem operation at sample rates up to 750 kS/s per channel • Simultaneous analog inputs on the DT9816 modules • Signal range of ±10 V on both the analog input and analog output • Generate sine, rectangle, triangle, or DC waveforms with the analog outputs • Three versions of digital I/O modules: isolated, nonisolated, and high current drive • Monitor and control up to 28 digital I/O lines • Perform event counting, frequency measurement, edge-to-edge measurement, and rate generation • Shielded, rugged enclosure for noise immunity, with built-in screw terminals • Easy signal connections on the DT9812-10V-OEM with two 20-pin connectors for all I/O signals • All modules run off USB power supply, no external power supply needed • Includes free QuickDAQ software to get up and running quickly (does not support DIO) Analog Inputs Supported Operating Systems • Windows® 10/8/7/Vista®/XP 32/64-bit Analog Inputs The DT9810 provides 10-bit resolution, while the DT9812, DT9813, and DT9814 modules provide 12-bit resolution. For maximum resolution, the DT9816 modules provide 16-bit resolution. The DT9810 and DT9812 modules provide eight singleended (SE) analog input channels. The DT9813 modules provide 16 single-ended analog inputs. The DT9814 modules provide 24 single-ended analog input channels. The modules can acquire data from a single analog input channel or from a group of analog input channels. Analog Input Sample Rate Analog Outputs Analog Output Update Rate Counter/ Timer

External Clock External Trigger Block Diagram of the DT9812-10V, DT9812-10V-OEM, and DT9812A Modules. All DT9812 versions provide 8 analog inputs with 12-bit resolution, 2 analog outputs, 16 digital I/O, and 1 counter/timer.

External Clock External Trigger Input FIFO Block Diagram of the DT9816 Series Modules. The DT9816 provides 6 simultaneous analog inputs with 16-bit resolution, 16 digital I/O, and 1 counter/timer.

Connect to a host computer using the standard USB 1.1 or 2.0 plug-in connector on the ECONseries module. The USB connector provides power to the module, eliminating the need for an external power supply, while providing complete enumeration for all data flow. Connect sensors directly to the screw terminal of the module. Screw terminals can accept AWG 26 to AWG 16 size wire. Shielded, rugged enclosure provides noise immunity LED indicator provides USB status Built-in signal I/O screw terminal connectors All ECONseries modules provide easy signal and USB connections in a shielded, rugged...

ECONseries Design Advantages Prevents Measurement Errors Operates Reliably Electro-Static Discharge ESD protection up to 8000 V The ECONseries provides 10 MΩ of input impedance for virtually error-free analog input measurements. The ECONseries provides 4000 V touch and 8000 V gap ESD protection circuitry for superior noise immunity. Performs Simultaneous Operations All I/O functions of the ECONseries are independent and are performed simultaneously. Detects Edges for Pulse Width, Frequency, and Period Measurements Prevents Measurement Errors Built-in Waveform Generator for generating sine,...

DT9816 Design Advantages Six Simultaneously Sampled Analog Inputs Ext Trig Accurate Measurements Designed In CLK Analog Input Sampled Data t AD = Aperture Delay of 35 ns t AJ = Aperture Jitter (Uncertainty) of 1 ns The time between each channel (Aperture Delay Matching) is 5 ns maximum. Data Stream The DT9816 modules feature six, independent, successiveapproximation A/D converters with track-and-hold circuitry. Each converter uses a common clock and trigger for simultaneous sampling of all six analog input signals. The throughput rate varies depending on the model you choose. The A/D design...

DT9810 modules feature a full-scale input signal range of 0 to 2.44 V. If you need a full-scale input signal range of ±10 V, the DT9812, DT9813, DT9814, and DT9816 modules are available. The DT9816 modules also feature a fullscale input signal range of ± 5 V. The DT9812, DT9813, DT9814, and DT9816 Series modules support the following trigger sources: The DT9812, DT9813, and DT9814 modules provide programmable gains of 1, 2, 4, and 8; and the DT9816 modules provide gains of 1 and 2. Analog Outputs • Software trigger • External digital (TTL) trigger DT9812, DT9813, and DT9814 Series modules...

The DT9817-R can switch up to 30 V at 400 mA. It features 8 dedicated digital input lines and 8 dedicated digital output lines. This module includes channel-tochannel isolation of up to 500 V (250 V between digital input channels that are paired in an opto-isolator). The DT9817-H and DT9817-R are ideal for solid state or mechanical relays. Multifunction Counter/Timers The DT9816 modules support one 16-bit counter/timer channel. All other modules feature one 32-bit counter/ timer (16 bits in rate generation mode). The counter accepts a counter/timer clock input signal (pulse input signal)...

QuickDAQ ships free-of-charge and allows you to get up and running quickly. • FFT Analysis Option (License Required) oo Includes all the features of the QuickDAQ Base QuickDAQ allows you to acquire and display from all Data Translation USB and Ethernet data acquisition devices that support analog input streaming. Combine QuickDAQ with Data Translation hardware to acquire data, record data to disk, display the results in both a plot and digital display, and read a recorded data file. Be productive right out of the box with this powerful data logging software. Data can be exported to other...