TP-75 series

Product catalog summary

Specifications Overview:
The TP-75 series includes models TP-75A, TP-75B, TP-75C, TP-75D, and TP-7503, each offering a 75W triple output with Power Factor Correction (PFC) function. These models support universal AC input and feature built-in active PFC with a power factor greater than 0.95.

Electrical Specifications:
- DC Voltage: Varies per model and channel, with options including 5V, 12V, 15V, 24V, and -5V/-12V/-15V.
- Rated Current: Ranges from 0.3A to 9A depending on the model and channel.
- Current Range: 1.5 to 10A for primary channels, with secondary channels varying.
- Rated Power: 74W to 75.8W.
- Ripple & Noise: Maximum values range from 50mVp-p to 120mVp-p.
- Voltage Tolerance: 3.0% for line and load regulation.

Input Specifications:
- Voltage Range: 90 to 264VAC or 127 to 370VDC.
- Frequency Range: 47 to 63Hz.
- Power Factor: Greater than 0.95 at 230VAC and 0.98 at 115VAC.
- Efficiency: Approximately 70% typical.

Protection Features:
- Overload: 105% to 150% of rated output power, with hiccup mode recovery.
- Over Voltage: Protection activates at 5.75 to 6.75V on the +5V output.
- Short Circuit: Automatic recovery after fault removal.

Environmental Specifications:
- Operating Temperature: -10 to +60°C, with derating required at lower input voltages.
- Storage Temperature: -20 to +85°C.
- Humidity: 20% to 90% RH non-condensing.
- Vibration: 10 to 500Hz, 2G for 60 minutes along X, Y, Z axes.

Safety and EMC Standards:
- Complies with UL60950-1, TUV EN60950-1, EN55022 Class B, and EN61000 standards.

Mechanical Specifications:
- Dimensions: 179 x 99 x 33mm (L x W x H).
- Weight: 0.65Kg per unit, with packaging for 20 units totaling 12.7Kg.

Additional Features:
- LED indicator for power on.
- Cooling by free air convection.
- Fixed switching frequency at PFC: 67KHz, PWM: 134KHz.
- 3-year warranty.

Notes:
- All parameters are measured at 230VAC input, rated load, and 25°C ambient temperature unless otherwise specified.
- Ripple & noise are measured at 20MHz bandwidth using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
- The power supply is a component intended for installation into final equipment, which must be re-confirmed for EMC compliance.

Catalog excerpts

75W Triple Output with PFC Function Features : Universal AC input / Full range Built-in active PFC function, PF>0.95 Protections: Short circuit / Overload / Over voltage Low profile: 33mm thickness LED indicator for power on Cooling by free air convection Fixed switching frequency at PFC:67KHz PWM:134KHz 3 years warranty SPECIFICATION MODEL OUTPUT NUMBER RATED CURRENT CURRENT RANGE RATED POWER OUTPUT VOLTAGE ADJ. RANGE VOLTAGE TOLERANCE Note.3 LINE REGULATION LOAD REGULATION SETUP, RISE TIME HOLD UP TIME (Typ.) VOLTAGE RANGE FREQUENCY RANGE POWER FACTOR (Typ.) AC CURRENT (Typ.) INRUSH CURRENT (Typ.) LEAKAGE CURRENT OVERLOAD PROTECTION OVER VOLTAGE WORKING TEMP. WORKING HUMIDITY 105 ~ 150% rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed 5.75 ~ 6.75V on +5V Protection type : Shut down o/p voltage, re-power on to recover -10 ~ +60 (Refer to "Derating Curve") 20 ~ 90% RH non-condensing ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS SAFETY & WITHSTAND VOLTAGE ISOLATION RESISTANCE EMC (Note 4) EMC EMISSION EMC IMMUNITY MTBF DIMENSION PACKING I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25 / 70% RH Compliance to EN55022 (CISPR22) Class B, EN61000-3-2,-3 Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, light industry level, criteria A 198.4K hrs min. MIL-HDBK-217F (25 179*99*33mm (L*W*H) 0.65Kg; 20pcs/12.7Kg/0.64CUFT 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to EMI testing of component power supplies. (as available on http://www.meanwell.com) 5. Derating may be needed under low input voltages. Please check the derating curve for more details.

Open the catalog to page 1

Open the catalog to page 2

75W Triple Output with PFC Function Mechanical Specification Assignment DC OUTPUT +V2 COM DC OUTPUT +V1 DC OUTPUT +V3 Block Diagram RECTIFIERS & FILTER POWER SWITCHING +V -V CONSTANT CURRENT LIMITING & DETECTION CIRCUIT Derating Curve Output Derating VS Input Voltage AMBIENT TEMPERATURE ( )

Open the catalog to page 3