QP-100 series

Product catalog summary

Specifications Overview:
The document outlines the specifications for the QP-100 series, a 100W quad output power supply with Power Factor Correction (PFC) function. It supports a universal AC input range of 90 ~ 264VAC and a DC input range of 127 ~ 370VDC, with a frequency range of 47 ~ 63Hz. The power factor is greater than 0.95 at 230VAC and greater than 0.98 at 115VAC at full load. The efficiency is approximately 74% to 78% depending on the model.

Output Specifications:
The power supply offers multiple output channels with adjustable voltage ranges. For example, CH1 ranges from 4.75 ~ 5.5V, and CH2 ranges from 3.14 ~ 3.63V. The rated power is around 100W, with a maximum ripple and noise of 100mVp-p to 200mVp-p depending on the channel.

Protection Features:
The device includes protections against short circuit, overload (105 ~ 150% rated output power), over voltage, and over temperature. The protection types include hiccup mode and shutdown with automatic recovery.

Environmental Conditions:
The working temperature range is -10 ~ +60°C, with a working humidity of 20 ~ 90% RH non-condensing. Storage conditions are -20 ~ +85°C with 10 ~ 95% RH. The MTBF is 139.9K hours minimum according to MIL-HDBK-217F standards.

Safety and EMC Standards:
The power supply complies with UL60950-1 and TUV EN60950-1 safety standards. It meets EMC emission standards EN55022 (CISPR22) Class B and immunity standards EN55024.

Mechanical and Other Features:
The dimensions are 199*99*50mm, and the unit weight is 0.87Kg. The device features free air cooling convection and a fixed switching frequency at 100KHz. It comes with a 3-year warranty.

Additional Notes:
All parameters are measured at 230VAC input, rated load, and 25°C ambient temperature unless otherwise specified. Ripple and noise are measured at 20MHz bandwidth using specific test conditions. Derating may be required under low input voltages, and the final equipment must be re-confirmed for EMC compliance.

Catalog excerpts

100W Quad Output with PFC Function Features : Universal AC input / Full range Built-in active PFC function, PF>0.95 Protections: Short circuit / Overload / Over voltage Free air cooling convection CH4: Polarity is selectable Fixed switching frequency at 100KHz 3 years warranty OUTPUT NUMBER RATED CURRENT CURRENT RANGE RATED POWER (max.) OUTPUT LINE REGULATION LOAD REGULATION SETUP, RISE TIME VOLTAGE RANGE AC CURRENT (Typ.) INRUSH CURRENT (Typ.) POWER FACTOR (Typ.) INPUT FREQUENCY RANGE 105 ~ 150% rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed PROTECTION OVER VOLTAGE OVER TEMPERATURE(OPTION) WORKING TEMP. WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS SAFETY & WITHSTAND VOLTAGE ISOLATION RESISTANCE EMC (Note 4) EMC EMISSION EMC IMMUNITY MTBF DIMENSION PACKING NOTE LEAKAGE CURRENT CH1:5.75 ~ 6.75V CH2:3.8 ~ 4.4V Protection type : Shut down o/p voltage, re-power on to recover 95 5 (TSW1) Protection type : Shut down o/p voltage, recovers automatically after temperature goes down -10 ~ +60 (Refer to "Derating Curve") 20 ~ 90% RH non-condensing -20 ~ +85 0.03%/ (0~50 ) 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes UL60950-1, TUV EN60950-1 approved I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25 / 70% RH Compliance to EN55022 (CISPR22) Class B, EN61000-3-2,-3 Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, light industry level, criteria A 139.9K hrs min. MIL-HDBK-217F (25 199*99*50mm (L*W*H) 0.87Kg; 20pcs/18.4Kg/1.28CUFT 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to EMI testing of component power supplies. (as available on http://www.meanwell.com) 5. Derating may be needed under low input voltages. Please check the derating curve for more details. File Name:QP-100-SPEC 2011-08-19

Open the catalog to page 1

Open the catalog to page 2

100W Quad Output with PFC Function Mechanical Specification Terminal Pin No. Assignment : Pin No. Pin No. Assignment Assignment 1 5 AC/L DC OUTPUT V3 2 6,7 AC/N DC OUTPUT V1 3 FG 8,9 DC OUTPUT COM 4 DC OUTPUT V4 10 DC OUTPUT V2 Block Diagram POWER SWITCHING RECTIFIERS & FILTER RECTIFIERS & FILTER MA & CONTROL RECTIFIERS & FILTER Derating Curve Output Derating VS Input Voltage AMBIENT TEMPERATURE ( )

Open the catalog to page 3