ROTARY AMPERMETER AND VOLTMETER SWITCHES SWITCHES F1Pxx • For panel mounting • For use in Industry, Maritime and offshore, Machine Building • The switches are built in accordance with the standards laid down in IEC947, IEC204, CEE24, VDE0630, VDE0660, VDE113, BS5419 • Switches could be delivered with requested text on plate Dimension & drilling plan Specifications Rated Voltage: Rated Current: Rated Overcurrent: Dimensions: Weight: Cable crosssection: Escutcheon plate Knob Description Santon switches are suitable for use in direct current systems, installations for higher frequencies, installations on board of ships, mobile installations, in dusty environments or where switching is very infrequent. They are suitable not only for use as control switches of multiple circuits, or as meter selecting switches, but also for use in main circuits as on load switches, such as motor switches, for operating machines, heating equipment, welding equipment, ovens, lighting equipment etc. When used normally, Santon switches are maintenance-free. Switches delivered for panel mounting plates. When securing the handle, do not tighten the screw more than is necessary. Always use 2 spanners for bolt and nut connections so that no pressure is exerted on the plastic discs. Use properly fitting tools and use the following torques as maximum values: for M4 - 1,4 Nm, for M6 - 5 Nm, for M8 - 20 Nm and for M10 - 40 Nm. The switches must, both during storage and during use, be protected against dust, dirt, agressive fumes and liquids. This needs to be checked from time to time and when doing so, switch fixings and terminal connections should also be verified. The frequency will very much depend upon the intensity of use. It is, however, recommended to have switches that are rarely operated, checked once a year, and when doing so, switched several times. Norway Denmark United Kingdom www.megacon.com ELECTRONIC CONTROL AND INSTRUMENTATION REF: Datasheet.F1P-Switches - REV: 1.00/02.2014 © All rights reserved to Megacon Megacon reserves the right to make any changes to the information a

ROTARY AMPERMETER AND VOLTMETER SWITCHES SWITCHES F1Pxx Principle connection Measurement of 3-phase line voltages. L1L2 Measurement of 3-phase line voltages and phase voltages, with mid Off-position. 3+0 Positions 3 Currents 2 Current Transformers Measurement of line currents in 3-phase / 3-wire system (2W3 and 2R3). 3 Positions 3 Currents 3 Current Transformers Measurement of line currents in 3-phase / 4-wire system (3W4 and 3R4). A The MEGACON policy is one of continuous improvement, consequently equipment supplied may vary in detail from this publication. ORDERING EXAMPLE: Type: F1P-D41 Norway...