INDICATING AC VOLTAGE TRANSDUCER MEVx • Single AC Voltage Transducer • Precision true RMS class 0,5 measurement, not affected by any waveform distortion • Very fast analogue output (<50mS) • Independent moving iron voltmeter Specifications Auxiliary Voltage: 100-120, 200-240, 380-415 or 440460VAC, 40-70Hz Optional Auxiliary Voltage: Voltage Input Range: Analogue Output: Temperature: Weight: Front protection: MEVE is to be used in system that requires fast response and monitoring of phase voltage. Ideal for regulation and control system that controls the voltage on generators, motors and inverters. The MEVE is a precision single-phase voltage measuring transducer. The unit has ONE very fast response analogue output signal, proportional to the measured voltage input. The analogue output is isolated from voltage input. The independent class 1,5 moving iron voltmeter input (term. 9 & 10) MUST be externally connected to read phase voltage. The unit meets IEC60092-504 and the relevant environmental and EMC tests specified in IEC60068/60092 and IEC61000/60533 respectively, to comply with the requirements of the major Classification Societies. Meter Input REF: Datasheet.MEVx - REV: 1.02 / 11.2011 Megacon reserves the right to make any changes to the information at any time