HIGH PRECISION SINGLE AC VOLTAGE TRANSDUCER - CLASS 0,2 MCVBx-C0,2 • High Precision Single phase AC Voltage Transducer • True RMS class 0,2 measurement, not affected by any waveform distortion • Very fast analogue output response time (30-50mS) • 1500V Galvanic isolation Specifications Auxiliary Voltage: 100-120, 200-240, 380-415 or 440-460VAC, 40-70Hz (Fuse 0,5A) Optional Auxiliary Voltage: 18-36 or 36-160VDC (Fuse 2A) Voltage Input range: 0-150, 0-300, 0-500 or 0-600V other ranges on request Analogue Output: 0-10, 0-20, 4-20, 4,3-20mA, max 500R 0-10V, min 100kohm Optional Output: DIN96 slave indicator panel Temperature: -20 to +70ºC Weight: 0.5kgs Front protection: IP21 To be used in applications that require a very fast response, high precision monitoring of phase voltage. Ideal for systems for measuring or regulation and control of the voltage on generators, motors and inverters. The MCVB1-C0,2 and MCVB2-C0,2 is a precision single phase voltage measuring transducer. MCVB1-C0,2 have auxiliary supply from the monitored voltage input and MCVB2-C0,2 have separate input for auxiliary supply. The unit has ONE very fast response analogue output signal, proportional to the measured voltage range. The analogue output is isolated from voltage input. It also includes an additional RJ12 output for a DIN96 Slave Indicator (optional). The unit meets IEC60092-504 and the relevant environmental and EMC tests specified in IEC60068/60092 and IEC61000/60533 respectively, to comply with the requirements of the major Classification Societies. Agreen “Supply On” LED indicates the auxiliary supply presence. RJ12 plug to optional slave indicator Analogue output RJ12 plug to optional slave indicator REF: Datasheet.MCVB2-C0,2 - REV: 1.04 / 11.2013 Megacon reserves the right to make any changes to the information at any time