Three Channel Temperature Relay Three channel Temperature Protection Relay for use with PT100 inputs FEATURES The KCT3 converts three PT100 inputs to three independent analogue signals. These signals are processed depending upon the instrument type – see below. TEMPERATURE CONTROLLER The PT100 inputs can be of the two or three wire type. The three inputs are connected to a common bus with the three output relays operating on the highest input. A single milliamp output relative to the highest input. The three inputs are grouped with two inputs to one channel and the third input to a second channel. One relay output and one analogue output relative to each grouping. The three inputs each have an individual channel with one relay output and one analogue output. Auxiliary Voltage 85-265V AC 18-36V DC 36-72V DC 100-300V DC Adjustments Trip level 1 Trip level 2 Trip level 3 Contact Rating AC : 2A (415V, 800VA) DC : 250mA (50W resistive) Relays shown de-energised. ORDERING INFORMATION Auxiliary voltage : Temperature range : Instrument type : The MEGACON policy is one of continuous improvement, consequently equipment supplied may vary in detail from this publication Megacon International – Norway – UK - Denmark REF: MPD-1204 www.megacon.com The MEGACON policy is one of continuous improvement, consequently equipment supplied may vary in detail from this publicat