Catalogs >
MCR Safety >
Safety Vest Specification Sheet For FRMCL2L

Safety Vest Specification Sheet For FRMCL2L
1 / 2Pages

Catalog excerpts

Safety Vest Specification Sheet For FRMCL2L - 1

Safety Vest Specification Sheet For FRMCL2L Item Number: Item Series: Case Pack: FRMCL2L LuminatorTM, Class II Safety Vest 50 ea. Case Dimensions: Case Markings: Case Weight: Safety vest composed of light-weight, GlenGuard Solid lime Modacyrlic / aramid blended fabric, inherently fire resistant. FR YKK hook and loop Closures Vest color – fluorescent lime. Meets ANSI Class II Standard for reflectivity and complies with NFPA 70E ASTM F1506 HRC 1 Compliant Arc flash resistant (ATPV: 5.4 calories/cm2). ¼” Grey binding same color as body. Front closure- (1) 1” x 8” hook and loop. Reflective Striping: (1) 2” wide Silver FR reflective stripes - horizontally around entire torso 10” from bottom of vest. (2) 2” wide Silver FR reflective stripes run vertically. 1 over each shoulder from front to back horizontal stripe. 3” Re-inforced D-Ring Access on upper back Front left chest pocket - 4” wide X 4¾“ tall. Front left lower pocket - 6½“ wide X 6¼“ tall. Right interior lower pocket - 6½“ wide X 6¼“ tall. FR Silkscreen Fire Resistant Icon on left chest Washing instructions: Machine wash with cold water and mild detergent. Dry on delicate, low cycle. Remove immediately. Do not iron. Do not dry clean Material: Color: Available Sizes: Vest Type: Fluorescent lime GlenGuard Solid Modacrylic Fluorescent lime yellow M – X4 ANSI Class 2, FR Vest Dimensions: M - waist 50”, half shoulder width 7½”, shoulder width 21”, center back length 25”, arm hole opening 32”. L - waist 53”, half shoulder width 8”, shoulder width 22”, center back length 25”, arm hole opening 32”. XL - waist 56”, half shoulder width 8”, shoulder width 22½”, center back length 26½”, arm hole opening 33”. X2 - waist 58”, half shoulder width 8”, shoulder width 24½”, center back length 27½”, arm hole opening 34”. X3---waist 66”, half width 9”, shoulder width 25½”, center back length 29”, arm hole opening 34”. Closure Type: Binding Type: Hook and loop Grey Modacrylic binding Closure Dimensions: Binding Thickness: X4 - waist 68”, half shoulder width 9½”, shoulder width 26½”, center back length 29”, arm hole opening 35”. Front only – 1” X 8” ¼“

Open the catalog to page 1

Safety Vest Specification Sheet For FRMCL2L - 2

Safety Vest Specification Sheet For FRMCL2L Vest Tag Info: Polybag Barcode Info: Case Marking: RN 48583 ANSI/ISEA 107-2010 GlenGuard Modacrylic Flame Resistant Arc Resistant (ATPV: 5.4 cal/cm2) NFPA 70E 2” Silver Reflective Materials Model No: FRMCL2L Size: Class 2 Level 2 Made in Dominican Republic Item:________ QTY: 1 Order#________ 50 Pieces Item # ________ Made in Dominican Republic

Open the catalog to page 2