video corpo

MCR Safety Cut Protection Catalog
42Pages

{{requestButtons}}

Catalog excerpts

MCR Safety Cut Protection Catalog - 2

Innovations Technology Center (ITC Lab) MCR Safety Innovations Technology Center 685 Highway 72 Piperton, TN 38017 In July of 2016, the MCR Safety’s Innovations Technology Center had the pleasure of becoming one of the first North American testing labs to receive the ISO/IEC 17025 accreditation under the ANSI/ISEA 105 scope. ISO/IEC 17025:2005 is the single most important standard for testing laboratories around the world. Laboratories accredited to this international standard have demonstrated they are technically competent and able to produce precise and accurate test and/or calibration...

Open the catalog to page 2
MCR Safety Cut Protection Catalog - 3

Equipment: Tomodynamometer TDM-100 Blade Validation: Before and after each sample specimen is tested, the blades must be checked, to ensure the effective sharpness of the cutting edge. Sample Prep: • Three glove samples are required to perform the test • The glove samples must be conditioned to specific environmental conditions • A 2”x 4” swatch cut from the palm of each glove at a 45-degree angle • The test sample is then mounted to the mandrel of the machine Testing: • Each of the three glove samples will receive a total of 15 cut through measurements. • The 15 cut through measurements...

Open the catalog to page 3
MCR Safety Cut Protection Catalog - 4

“It’s only after you’ve stepped outside your comfort zone that you begin to change, grow, and transform.” - Roy T. Bennett Every day consists of change and improvement so at MCR Safety we are living this out by updating the most powerful cut protection offerings in the industry with a single brand that represents the best of the best in fibers, coatings, and technology advancements as CUTPRO. One unified brand identity along with an easy identifiable ANSI cut scoring system. Glove Shell and Coating Guess what?! The name is changing and that’s it. The glove shell fiber combination and...

Open the catalog to page 4
MCR Safety Cut Protection Catalog - 5

ARX™ is an Aramid base fiber designed to protect against cut, abrasion, and flame resistant hazards which is available in coated knits, leather, and sleeve configurations. This fiber is developed and manufactured in MCR Safety’s state of the art spinning facility where quality is never sacrificed. #WeProtectPeople www.mcrsafety.com/cut-protection HyperMax™ synthetic yarns are engineered to protect against cuts and lacerations ranging from ANSI Cut Level A2 up to A9. Excellent abrasion properties and high levels of comfort are key to the success of this fiber. #WeProtectPeople...

Open the catalog to page 5
MCR Safety Cut Protection Catalog - 7

Overall Features: • ANSI A9 Cut Protection – extreme slice resistant • ANSI Puncture Level 3 – prevention of penetrating hazards • ANSI Contact Heat Level 5 – Up to 608°F thermal protection • Heavy Material Fabrication • Blade Handling • High-Risk contact with glass, wire, metal, wood • 9” length – forearm protection • Spandex hand cuff – for stationary protection to allow use with gloves • Ambidextrous • 19” length – extended arm protection • Elbow gusset – improved range of motion • Spandex hand cuff – for stationary protection to allow use with gloves • Gusset clip – firm attachment to...

Open the catalog to page 7
MCR Safety Cut Protection Catalog - 8

Mechanics Mechanics Seamless Seamless Seamless Gauge/ Shell Palm ANSI-ISEA 125 ANSI ANSI ANSI Fiber Palm Lining Color Color Level 2 Cert Abrasion Puncture Conductive Heat N/A Alycore Synthetic Yes X 4 X N/A Alycore Synthetic Yes 4 3 X 15 HyperMax™ Nitrile Yes 3 5 1 7 SteelCore PVC blocks 1 side Yes 4 X X PVC blocks 2 sides Yes 4 X X 7 SteelCore A8 ANSI CUT ≥ 5000 Grams Item # 3604HP PD2954 9350 Gauge/ Shell Type Fiber Lining Color Leather Driver N/A HyperMax™ Mechanics 13 HyperMax™ Seamless 7 SteelCore Palm Goatskin Foam Nitrile Uncoated Palm ANSI-ISEA 125 ANSI ANSI ANSI Color Level 2 Cert...

Open the catalog to page 8
MCR Safety Cut Protection Catalog - 9

Sizes: S-XXL • Hypermax™ engineered yarn - greater cut resistance • Nitrile coated - wet/dry grip Handling Extremely Sharp Materials PD2905A Predator™ Sizes: S-XXXL • Alycore lined - extreme cut protection • Synthetic suede palm with polymer pads - tactile grip Scrap/Barbwire/Rebar Handling Sizes: XS-XL • Dual wrapped engineered yarn - extreme cut protection • Double sided PVC blocked - increased grip/longevity • Bleachable material - greater launderability Meat Packing, Food Processing, Food Service Sizes: M-XL • Premium goatskin - high tensile strength • Breathable abrasive protection...

Open the catalog to page 9
MCR Safety Cut Protection Catalog - 10

Sizes: S-XXL • Hero™ fiber made with DuPont™ Kevlar® • Split cowhide leather palm - extreme abrasion • Reinforced over-edge thumb - extended wear life Rebar, Metal Stamping, Sheet Metal, Recycling A7 ANSI CUT ≥ 4000 Grams Item # Seamless Seamless Seamless Seamless Seamless Seamless Seamless Gauge/ Shell Fiber Lining Color 7 Hero™ 7 Hero™ 7 Hero™ 7 Hero™ 13 HyperMax™ 7 Spectra® 7 Spectra® Palm PVC dots 1 side PVC dots 2 sides PVC stripes Split Cow Bi-Polymer Uncoated Uncoated Palm ANSI-ISEA 125 ANSI ANSI ANSI Color Level 2 Cert Abrasion Puncture Conductive Heat Yes 3 X X Yes 3 X X Yes 3 X X...

Open the catalog to page 10
MCR Safety Cut Protection Catalog - 11

93857 Sizes: M-XL • Hero™ fiber - Kevlar® and Synthetic combo • Single sided PVC dots - increased grip • Reinforced over-edge thumb - extended wear life Process Assembly, Metal Stamping, Machining Parts 93859 Sizes: M-XL • Hero™ fiber - Kevlar® and Synthetic combo • Double sided PVC dots - increased grip/longevity • Reinforced over-edge thumb - extended wear life Process Assembly, Metal Stamping, Machining Parts 93868 Sizes: XS-XL • Hero™ fiber - Kevlar® and Synthetic combo • Single sided PVC stripe - increased grip • Reinforced over-edge thumb - extended wear life Process Assembly, Metal...

Open the catalog to page 11
MCR Safety Cut Protection Catalog - 12

Gauge/ Type Lining Leather Driver N/A Mechanics N/A Seamless 10 Seamless 13 Seamless 13 Seamless 13 Seamless 7 Seamless 7 Mechanics N/A Seamless 13 Seamless 13 Seamless 13 Seamless 10 Seamless 10 Leather Driver N/A Seamless 18 Seamless 10 A6 ANSI CUT ≥ 3000 Grams Fiber Dyneema® Dyneema® Dyneema® Hero™ Hero™ Hero™ Hero™ Hero™ HyperMax™ HyperMax™ HyperMax™ HyperMax™ HyperMax™ HyperMax™ Kevlar® Kevlar® SteelCore Shell Color Palm Goatskin Goatskin Foam Nitrile Uncoated PVC Fingertips PVC dots 1 side Uncoated PVC dots 1 side MAXGrid™ Sandy Nitrile Polyurethane Polyurethane Foam Nitrile Foam...

Open the catalog to page 12

All MCR Safety catalogs and technical brochures

  1. EBP1

    1 Pages

  2. VSURVMLB

    2 Pages

  3. Catalog 2016

    132 Pages

  4. Catalogue

    148 Pages

  5. Oil & Gas Gear

    20 Pages

  6. Pantera PN2

    2 Pages

  7. 9178NFO

    2 Pages

  8. 92733PU

    2 Pages

  9. Full Catalog

    148 Pages

  10. BGP 160

    1 Pages

  11. BBS 160

    1 Pages

  12. PBP 120

    1 Pages

  13. PBS 120

    1 Pages

  14. BYR100 Boots

    1 Pages

  15. MCR Safety

    36 Pages

  16. Gloves Catalog

    21 Pages

Archived catalogs