3 Channels Gas Mixer Revision 1.9 Dec 2018

emc<? instruments MCQ Gas Blender 100 Series High Performance Gas flow Dilutor & Gas flow/ Mixing System Technical Data Sheet ce From this solution... Specifications: Mixing and Blending up to 3 channels for non-aggressive gases. — Ideal to make gas mixture for sensor or analyzer calibration. — Fully digital. — Needs No External Power & Control Unit. — Needs No expensive and cumbersome tubing and fittings. — Compact and transportable structure “Lab in a Box”. - Accuracy for each channel: N2, 20 °C, 101.325 kPa (1 atm): 5-100% FS: 1% of SP < 5% FS: 0,2% of FS — Range of Measurement: 0.01 sccm...

High Performance Gas flow Dilutor & Gas flow Mixing System From this solution… The Gas Blender 100 series allows to simplify the common arrangement for gas delivery that usually consists of a control master and a series of Mass Flow Controllers (MFC), substituting the whole setup with a single compact box. The Gas Blender 100 series has three inputs from gas cylinder and a single channel for the blend output. Technical conept: airflow sensor GAS INLET from cylinders airflow sensor airflow sensor Microcontroller board power supply RS485 connection to other devices In the Gas Blender 100 series,...

High Performance Gas flow Dilutor & Gas flow Mixing System Front Panel: FRONT PANEL Push-in connector The front panel of the Gas Blender 100 series contains four quick connector for the insertion of input tubes and for the output of the blend. Tubes with an external diameter of 6 mm can be inserted in the push-in connector. MCQ suggest to use tubes made of Tygon/Viton/PTFE/Stainless Steel/Polyurethane. Rear Panel: ON/OFF REAR PANEL Connection to other Gas Blender On the rear panel the are located the switch, the line power connection, the USB connection for the communication with a PC, and the...

High Performance Gas flow Dilutor & Gas flow Mixing System Experimental arrangement: Doluition and mixing factors controlled by software Test chamber The gas cylinders can be simply connected to the push-in connectors through appropriate tubes, the output of the device must be connected to the test chamber or to the environment for custom applications where the blend is delivered. The mixing and dilution factors can be controlled by software, where the desired flow in each channel can be set and the actual gas flow is continuously displayed in a plot. Set-up for strong dilutions (*): 1 1 Diluting...

High Performance Gas flow Dilutor & Gas flow Mixing System

High Performance Gas flow Dilutor & Gas flow Mixing System 3D Views: Inside Gas Blender: Contact MCQ Instruments MCQ s.r.l. Via delle Quattro Fontane, 33 00184 - Rome - Italy Phone: +39 06.48.47.90 Fax: +39 06.99.36.72.67 [email protected] [email protected]